ZNC540 electric spark machine

.Machine body structure with advanced castings of resin sand stress relieving., 2.Adopting precision CAD design and high preci - details see: https://www.machineto.com/znc540-electric-spark-machine-10144044
Condition:NewCNC or Not:CNCPlace of Origin:China (Mainland)Brand Name:tendtool
Model Number:EDM540ZNCCertification:CE  
ZNC540 electric spark machine
contact supplier for ZNC540 electric spark machine


EDM540ZNC

ZNC Sinker EDM, Die sinking machine
Japan SANYO DC Servo

Finish: Ra≤0.4μm
Current: 60/100A
Max. Speed: 800mm³/Min
Parameters and Specification
Parameters / Specification
Unit
EDM540ZNC
Working table travel X×Y
mm
500x400
Working table size L×W
mm
800x500
Principal axis travel
mm
200+(300)
Principal axis load
Kg
150
Machine load
Kg
1300
Distance between electrode and working table
mm
128~635
Size of oil reservoir
mm
1200x740x480
Machine weight
Kg
2200
Machine size
mm
2100x1620x2600
Main Application
EDM sinker machine is used for cavity forming. It utilizes conductive material (copper, graphite, steel) as electrode to process workpiece (conductive material) by spark erosion. Main use: processing precious die, cavity mold and so on. It is widely used in metal processing and mold making workshop.
ZNC EDM SINKER
1. Adopt Japan SANYO AC servo motor.
2. Steady safety device, optical sensors, auto answer, fire extinguisher and power cut off.
3. Good machine structure, high rigidity, high precision, V slide design.
4. Adopt HT300 ageing treatment casting, keep precision long time.
5. Adopt high quality imported oil pump.
6. Three-axis linear scale;
7. Can choose red oil, pumping oil slagging mode, but also choose not to dip the oil processing;
8. For copper, graphite, steel, on the cavity, and special shape holes machining
9. Lubrication system uses recovery mode, rail lubrication action at once, and keep the look clean
10. Moisture-proof, Antirust, rust, gold plated K PCB board design
ZNC Control SYSTEM
ZNC System Technical Performance
1. There is an automatic A.R.C (carbon deposit sensitivity device) to prevent damaging workpiece.
2. VLSI, high power VMOS to provide power.
3. High and low clearance individual circuit.
4. PWM (impulse width) servo system, standard DC servo motor.
5. Synchronous discharge system of high voltage super posited.
6. Square wave and equal energy output.
7. Circuits of super-fine process.
8. Capacity of voltage regulation is ±20%.
9. Circuits of copper electrode and graphite electrode are separate and individual process parameters.
10. Discharge parameters can be edited automatically, and there are rough, medium, fine, superfine process terms to be chosen.
11. Z axis is of super-precision process, process position can be affirmed repeatedly.
12. There are some safe devices in circuit.
l Self-diagnostic system and LED state display, convenient to examine and repair
l Oil level control, process device will be stopped automatically
l If temperature of working fluid is too high according to induction, the process will be cut off automatically
l Temperature induction, fire extinguisher sprays automatically and cut off the power supply at the same time
l Light sensitive device, self-response, and fire extinguisher cut off the power supply at the same time
l Automatic fire extinguisher, which is featured in best security, without pollution, there is no damaged to machine and mould.
ZNC Configuration of ZNC System:
A. P2 CPU industrial control computer
B. EDM software system control.
C. 15 inches LCD.
ZNC System Running Environment:
A. Temperature: 5-40ºC
B. Moisture: 40%-80%
ZNC540 electric spark machine
Packaging Detail:woodern case
Delivery Detail:35 days

Related Product for ZNC540 electric spark machine