Home  >  Mining & Metallurgy Machinery  >  Mining Machinery  >  Mineral Separator

flotation machine:, 1.with ISO9001:2000 certificate, 2.with CE certificate, 3.with Large-scale production ability, 4.experienced - details see: https://www.machineto.com/zinc-nickel-and-molybdenum-selection-flotation-machine-10314991

General introduction for flotation machine

Kunding Flotation machinecan achieve specific separations from complex ores ,so it is applied to rough processing and concentration. It is widely used in reverse flotation of non-ferrous metal such as copper, lead, zinc, nickel, molybdenum, ferrous metal and nonmetallic materials.

Operating principle for flotation machine

After the mixture of pulp and flotation reagent entering the first cell of the bank, it will be blended with air under the negative pressure produced by the rotating impeller .Driven by impeller producing centrifugal force ,the mixture enters the mineralizing area, where the air bubbles will be broken to contact the mineral particles fully and become mineralized froth. Moving to the separation area, the mineralized froth will then be scraped by the rolling scraper while the remained particles will be mixed, mineralized and separated again. The pulp at the bottom of the tank will flow into the second cell to repeat the process in the first cell, and then into the third cell. This process will be repeated until the tailings are discharged from the tailings tank.

Features and advantages of flotation machine

1. Self-aeration

2. Efficient pulp cycle

3. Stable operation

4. energy-saving

Technical parameters for flotation machine

model	Tank volume (m³)	Suction intensity (m³/m².min)	Power (kw)	Capacity (m³/min)	Weight of single tank(kg)
SF-0.15	0.15	0.9-1.0	2.2	0.06-0.18	270
SF-0.25	0.25	0.9-1.0	1.5	0.12-0.28	370
SF-0.37	0.37	0.9-1.0	1.5	0.2-0.4	470
SF-0.65	0.65	0.9-1.0	3.0	0.3-0.7	932
SF-1.2	1.2	0.9-1.0	5.5	0.6-1.2	1370
SF-2.0	2.0	0.9-1.0	7.5	1.0-2.0	1750
SF-2.8	2.8	0.9-1.0	11	1.5-3.5	2130
SF-4.0	4.0	0.9-1.0	15	2-4	2585
SF-6.0	6.0	0.9-1.0	18.5	3-6	3300
SF-8.0	8.0	0.9-1.0	30	4-8	4130
SF-10	10	0.9-1.0	30	5-10	4500
SF-16	16	0.9-1.0	45	8-16	8320
SF-20	20	0.9-1.0	45	10-20	8670

* The Technical parameters above are only for your reference,any change of model and size of the machine will not be informed .