Home  >  Construction Machinery  >  Building Material Machinery  >  Pipe Making Machinery

Milling diameter:15-63.5mm, Milling thickness:0.6-2.5mm, Milling speed:20-100m/min, High frequency welder power:150kw - details see: https://www.machineto.com/zg50-tube-mill-10081971

Machine model:ZG50 tube mill line

Basic Machnical Components:

(1)Uncoiler~ (2)Shear and butt-welder~(3)Vertical-type accumulator~ (4)Main machine(Forming, wading, sizing)~(5)Computer cutting saw ~ (6)run-out table

Other Electric Components:

(1).Operating table for Computer cutting saw

(2).Solid state high frequency welder:60KW

(3).Overall control table

Technical parameter details as below:

Main Technical Parameters For Tube Mill line:

Machine model	ZG50
O.D. of Welded Tubes	φ15-63.5mm
Milling Thickness of Welded Tube	0.6-2.5mm
Milling speed(Line speed)	20-100M/min
Power of Main motor	110KW
High Frequency Welder Power	150KW

Main components brand:

Components	Brand	Orgin
Bearings	HRB	Haerbin,China
Main motor	Hengli	Hangzhou,China
Reducer	Taixing	Taixing,China
Cylinder	Airtac	Yangzhou,China
Shearing and butt-weler	Hengyuan	Qingdao,China
High frequency welder	Red star	Baoding,China
Overall control table	Red star	Baoding,China
Operating table	Kante	Shenyang,China

Main technical parameters details for each parts:

1.Uncoiler:

Type:Double side 180° rotating

Expanding:Manual expanding

Loading weight: 800kgs

TYPE 1:Manual expanding uncoiler TYPE 2: Hydraulic pressure expanding uncoiler

2.Shearing and butt-welder:to insure two steel coils to be welded tidily.

Shearing Power: Air pressure

Welding method: Arc welding

3.Vertical--type accumulator:

The strips stored in it shall be enough to ensure main machine to run continuously while welding two coiled strips.

(1)Form: Cage-type plate-welded part with automatic feeding and delivery system.

(2)Adjusting method: Manual spiral adjusting.

(3)Accumulating volume: 150-300M.

4.Forming,welding and sizing main machine:

(1)Feed leveling device:

a. Type: 9 rolls are passively leveled for leveling strip steel to make steel strips go into forming device.

b. Guiding roll: One pair

(2)Forming device:

Mainly roughly mill-forming steel strip and controlling weld seam.

a. Horizontal roll stand:

Quantity: 7

Structure: Cast steel, double housing, changing rolls in the side

Diameter of horizontal roll’s shaft:Φ55mm, material: 42CrMo

b. Vertical roll stand:

Quantity: 7

Type: Passive rotation

Diameter of vertical roll’s shaft:Φ35mm, material: 45# steel

c. Drive gear box (Doubletransmission)

Quantity: 7

Structure: Spiral bevel gear, cylindrical gear

Material: casing: QT50, gear: 20CrMnTi and 40Cr, input and output shaft: 40Cr

Drive transmission: 14 sets of Jeep Auto 141 universal transmission shaft

d. One set of bed for installation

(3)Guiding extruding and welding scraping apparatus:

a. One set of guide roll stand for controlling direction of pipe seam to insure pipe seam flatly and straightly entering into extruding rollers.

b. One set of extruding roll stand for controlling weld seam to realize successful welding.

c. Two sets of scraper frame for scraping outside weld seam

d. Installation bed along with forming machine

(4) One set of water cooling device.

(5)Sizing device:Mainly fine shaping pipe after welding and controlling size accuracy. Each 6 sets of horizontal roll stand, vertical roll stand and drive gearbox, 12 sets of universal shaft. (Structure same as forming device)

(6)Roughly straightening machine frame:

a. Type: Turk’s head type, 4 rolls single side two sets

b. One installation bed along with sizing main machine.

(7)Driving system:The main unit is connected with main reduce by major motor and transmits power to gearbox branches, then gearbox branches drive upper and down shafts on horizontal roll frame.

a. Main motor: Z4 series, DC110KW one set

b. Main reducer: ZLYseries (outside four-shaft ends) one set

5.Computer cutting saw:

(1) Cutting method: Computer-controlled tracking and automatic cutting

(2) Cutting thickness: δ0.6-2.5mm

(3) Cutting O.D.: Φ15-Φ63.5mm

(4) Cutting length: 4-8M

(5) Cutting tolerance: ≤±3mm

(6) Cutting motor: 15KW, second-class AC motor

6.Run-out table:Welded frame structure equippedwith sizing signal system.

7.High frequency welder: 150KW

Note:All of above information is for normal design, some important requirements from customer can be used on our tube mill line,for example,if customer need to use Siemens motor instead of hengli motor, and also need to change the bearings to NSK brand, we can do all of these as well if customer can bear the increased expense.

For tube mill, we have the strong capability to design and manufacturing according to client's individual requirements. The tube mills that are produced by "Nanyang" Company Ltd. have good quality, we believe our products are the No.1 in China industry.

Hope to be your faithful partner in the near future!!