Home  >  Metal Processing Machinery  >  Metal & Metallurgy Machinery  >  Metal Moulding Machinery  >  Thread Rolling Machines

Z28-80A small thread rolling machine:, 1.High precision, 2.Operation condition is safe, 3.Best price - details see: https://www.machineto.com/z28-80a-small-thread-rolling-machine-10166878

Z28-80A small thread rolling machine

Description of our Thread Rolling Machine:

This model is mainly used for processing precision standard parts of external thread and high strength, including regular thread, trapezoid thread and modulus thread.

The objective material to be processed including carbon steel, alloy steel and nonferrous metal with elongation over 10% and tensile strength less than 100kgf/mm2.

Characteristics of our Thread Rolling Machine:

1.Machine tool:steel welding

2.Rolling wheel:hard alloy

3.motor:380V/3 phase,220V/2 phase /material: copper

4.power distribution box

5.Time Relay

Manual Introduction of our Thread Rolling Machine:

1 Wearing gloves to operate cold heading machine is forbidden.

2 All fasteners must be carefully checked whether locked well before driving equipment, safety protection device is whether in good condition, and during working must always examine, prevent loose and cause an accident because of the violent vibration.

3 After the equipment adjusted, first open flywheel, inspect each working parts normal or not,take off pull rod of switch vehicles, and then start motor. It is strictly forbidden to start motor while switch.

4 All fault should be excluded before driving, first short time idle running,and then trial heading.

5 While in motion, the operator should stand in a safe place.Taking workpiece is forbidden at the concave and convex die place, only at the bottom can view products.

6 Carefully adjust the die and punch when replaceing products, , and careful check each part normal or not.

7 In the process of production, if there is failure, must immediately stop, find out the reason, eliminate hidden dangers. If the brakes are broken, it is strictly forbidden to drive.

8 Insurance plate (insurance rod) must add protective device, in order to avoid the fracture accident. All protective device shall not be arbitrary remove, lost.

Technical Parameters of our Thread Rolling Machine:

Pictures to show you our Thread rolling Machine:

...