Home  >  Metal Processing Machinery  >  Metal & Metallurgy Machinery  >  Metal Casting Machinery

1 Sand mould quality is good, 2 Basic requirements is lower, 3 High frequency,Low amplitude,pneumatic control, 4 Spring buffer - details see: https://www.machineto.com/z146w-jolt-squeeze-moulding-machine-for-foundry-10160724

Company advantage

Listed company

State owned holding company
More than 1,000 employees, 398 technical personnel.
Annual production capacity can reach 100 million

Work principle

The worktable fall and collide with floating shock-iron,and the sand was tighted slightly, and then to compaction,get the top and bottom of sand mould are tight. The slightly shock is high frequency (500-1000 times/min), small amplitude (5-25 mm) vibration instead of low frequency (60-120 times/min), the large amplitude vibration. This kind of moulding machine made of sand mold are good quality, the basic requirement is also lower.

Jolt squeeze Moulding Machine for Foundry

ITEM	UNIT	Z143W	Z144W	Z145W	Z146W	Z146WB	Z148CW	Z148E
Flask dimension	mm	400*400*100	400*500*180	450*500*200	500*600*200	500*600*200	630*800*320	900*800*320
Worktable dimension	mm	560*420	465*500	600*460	550*700	550*700	900*730	1000*820
Air pressure	Mpa	0.55	0.6	0.6	0.6	0.6	0.6	0.6
Compressive stress	kgf	4000	4200	6300	7000	8300	12000	18000
Compress process	mm	100	120	160	160	160	180	200
Drawing mould process	mm	160	150	200	200	200	320	320
Distance compacting plate with worktable	mm	200-370	300-400	300-450	350-450	450-600	680	600-700
Productivity	mould/h	40-60	40-60	40-60	40-60	40-60	40-60	40-60
Out line dimension L*W*H	mm	950*680*1280	1050*1100*1410	1200*1000*1693	1380*850*1565	800*1200*1670	1600*1038*2200	1152*1162*2292

ISO9001 quality certificate	Factory	We are public company