Home  >  Packaging Machinery  >  Labeling Machines

Bottle body and cap labeling machine, 1.Capacity:20-200bpm, 2.PLC control, touch screen, 3.Label for bottle caps, 4,ISO,CE,SGS - details see: https://www.machineto.com/yxt-c2-bottle-body-and-cap-labelling-machine-10058256

♦YXT-C2 Bottle body and cap bottle labelling machine♦

Technique parameter:

Space between labels: 3mm

Label width: 10-150mm

Label length: 20-250mm

Bottle height: 30-350mm

Production capacity: 30-250 bottles/min

Power supply: 220V-50Hz/60Hz

Power: 550W

Weight: 400Kg

Dimension: 2500mm×1500mm×1400mm(L×W×H)

Label precision: ±1mm

Functions:

(1)The bottle body and cap labeling machine adopts imported PLC control system,or touch switch knob control,electes Germany Leuze photoelectric device, variable speed motors, conveyor chain board and imported belt related parts.

(2)Host design of this automatic labeling machine absorbs import machines'labeler transmits way,solving the general domestic labeling unstable factors.

(3)The labeler machine is suitable for different bottles,easy adjustment,can be finished in a short time.

(4)A quick printer can be added if needed

(5)This flat labeling machine is suitable for round bottle of medicine,chemical,food,commodity etc bottle body and cap labeling, such as chewing gum bottle.

Operating principle:

Bottle are conveyed onto chain plate with guardrail and go through bottle dividing device, to ensure
bottles go one by one with safe distance. A sensor for bottle will send signal to PLC once it detects that bottle arrives. PLC will then notify stepping motor which controls label-sending to send labels out. Meanwhile another set of photoelectric sensor will control the label q'ty sent out, to ensure one-bottle one-label. After labeling, bottles will roll ahead through some label-pressing device so that labels will be complete fit to the body of bottle. After labeling onto the bottle body, bottles will go ahead on conveyor and finish another labeling on the cap.

Operation procedure:

(1)As shown on the correct installation tags,adjust the height of each place.

(2)Check the label position is correct.

(3)Adjust elam bottle rool and volume label plate position.

(4)Open power supply,open photoelectric switch,the printer should preheating fifteen minutes.

(5)Open motor and send non-standard switch,try to labeling machine,if there are any complications,please exclude.

(6)Labeling height adjusting.

(7)Confirm trouble-free hind can safe production.

(8)Power off.

.