YX443 Flat embroidery machine

SPECIFICATIONS:

1)High-speed Toshiba induction motor

2)Original Japanese rotary hooks and bobbin cases (KOBAN)

3) Antihum stepping motor

4) Original Italian belt with Aluminum drive system

5) Ultra-modern computerized control system( HK Rainbow)

6) Maximum embroidery speed: 850 rpm

7) 5 inches color LCD monitor with display, read & write option

8) USB Input and output driver

9) Auto-thread trimming (ATH) option

10)Built-in editing option like to modify, insert and delete

11)Standard design memory up to 10,00,000 stitches

12)Pattern scale up-down to reduce up to 50% and to increase up to 200%

13)Free bobbin winder

14)Boring Device

15)Standard spare parts and accessories

16)Stitch length: 0.1 ~ 12.7 mm

17)Power supply: AC, 1/3 phase, 380V +/- 10%, 50/60 Hz

18)Power consumption: 1.2 ~ 1.5 Kw

Main Functions:
Supporting flat embroidery
Equipped with advanced centralized frame drive system

Automatically or manually cutting device.
With power failure protection function. If power cuts during embroidering, and is on again, it can continue stitching in the former power-off status.
With mending embroidery, repeated embroidery, design embroidery combination function.
With design rotary. Zoom, delete, copy, inputting function.
With design needle insert. Revise, delete, copy, output and quick edition.
If set the still needle moving, actually no embroidery will be done, only run machine along the stitches trace, in addition, no need to move the frame in each stitch, only move it to the position in certain stitches number.
Synchronous disk management. Can read disk, output disk, delete pattern while machine running(according whether function keys ash-showed to know function that operate at the same time) it may improve efficient.
Powerful design edition function. Could test edition and punching.
Other general function. Could produce special machine according to customer's request.
Could paint any colour according to customer's demand.