Home  >  Apparel & Textile Machinery  >  Leather Production Machinery

1.Foil stamping machine, 2.Used for synthetic leather, artificial leather, genuine leather, 3.Stamping gold and silver patterns - details see: https://www.machineto.com/yg-02b-foil-stamping-machine-for-all-knids-of-leather-10265413

YA-02B Foil Stamping Machine for All Knids of Leather

Characteristics for YA-02B Foil Stamping Machine for All Knids of Leather:

This hot stamping machine has heat system adopted the cyclic high temperature heat-transfer oil machine (our own R&D) to heat, the tempreture can reach to 200ºC, keep the tempreture stabilization, precision, well-distributed.

Main parameter for YA-02B Foil Stamping Machine for All Knids of Leather:

Type	02B
Size(L×W×H)(mm)	3000*2000*1600
Power	21 KW
Stamping Standard	215*1650 mm
Motive Power	3HP (DC stepless speed regulation)
Working Width	1650 mm 65''
Working Speed	0-30 m/min

Range of application
This hot stamping machine is siutable for
1. Genuine leather, such as stamping gold and silver patterns on the surface of the material
2. Artificial leather, such as stamping gold and silver patterns on the surface of the material

Caution for usingYA-02B
1. The machine surface should be without watermarks, oil, dust, debris, large drum, mesh belt, rolling wheels, idler pulley, plastic pots, plastic roller, pulp wheel, knife plate should wipe, wash clean.
2. Strictly prohibited on-load open, barrier gate.
3. Motor can never exceed the load (110%); accelerate, deceleration turning "speed adjustment" knob should be careful, and gradually transferred to the required speed, or easily damaged motor.
4. Forbid to operate "positive inversion switch" when machinery is in running, otherwise fragile to damage converter and motor.
5. To adjust the wheel of stepless variable speed machine can fine-tune the tightness of gluing when machine running, keep material speed synchronous with the heating roller, but prohibit to rotate the hand wheel when machine stop, (that is to say can not change speed), Otherwise, easy to damage stepless gearbox.
6. Keep waxing regularly on stepless gearbox, motor belts, often add oil in chains, bearings, cylinder stroke, and change oil regularly in worm gear reducer to ensure its lubrication, running well.

7. Inverters data has been set well before leaving the factory, non-professionals is strictly prohibited to change, set, disassembly and repair.