Home  >  Chemical Process Machinery  >  Chemical Machinery & Equipment  >  Drying Equipments  >  Flash Drying Equipment

The flash dryer is used to dry paste material,cake material., The flash dryer is an instant flash dryer., The flash dryer is hig - details see: https://www.machineto.com/xsg-series-spin-flash-dryer-10290075

XSG Series Spin Flash Dryer

Description
On the basis of taking and absorbing the APV ANHYDRO A/S technology and soul of the same kind domestic drier, our factory and APV have developed this machine. This is a new kind of drying equipment used for drying the materials, such as paste state, filter cake state, thermal sensitive powder and particles. Our factory is equipped with the test sample machine, which can be used for carrying out the drying tests of various feeds for our users and for supplying the data and for helping the type selection.

Principle
The hot air enters into the bottom of the drier in tangent direction. Under the driving of the stirrer, a powerful rotating wind field is formed. The paste state materials enter into the drier through the screw charger. Under the powerful function of the stirring vanes at high-speed rotation, the materials are distributed under the function of strike, friction and shearing force. The block state materials will soon be smashed and contact the hot air fully and the materials are heated and dried. The dried materials after the de-watering will go up with the heat-air flow. The step rings will stop and keep the big particles. Small particles will be discharged out of the drier from the ring center and will be restored by the cyclone and dust remover. The not-fully-dried or big piece materials will be sent to the wall of the equipment by centrifugal force function and be smashed again after they fall down to the bottom.

Features
This machine combines the whirl technology with the fluidity, ejection and smashing step technologies.
The equipment is compact and small in size, high in production efficiency and continuous in the production. It has realized that "a small equipment can perform the large production".
The drying capacity for this machine is big but its energy consumption is low. Its heat efficiency can go up to more than 70%.
The material stay time is very short. The quality of the final products is very good. The machine can be used for drying the heat sensitive materials.
For the negative pressure or the micro-negative pressure operation, the machine is good for its tightness and high in the efficiency so as to eliminate the environmental pollution.

Materials
Inorganic compounds: borax, calcium carbonate, hydroxide, copper sulfate oxide, barium carbonate, antimony trioxide, all kinds of metallic hydroxide, all kinds of heavy metallic salt, synthetic cryolite and so on.
Organic compounds: fenatrol (insecticde of agrochemicals), cadmium laurate, benzoic acid, germicide, sodium oxalate, cellulose acetate and so on.
Ceramics: kaoline, silicone trioxide, clay and so on.
Dyestuff: anthraquinone, black ferric oxide, indigo blue pigment, butyric acid, titanium hydroxide, zinc sulfide, all kinds of intermediate of azo dye-stuff.
Foodstuff: soya protein, agglomerative starch, less, tritcin, wheat starch and so on.

Technical Parameters

Type	Barrel diameter mm	Main machine dimensions mm	Main machine power kw	Treatment wind capacity m3/h	Water evaporation quantity kg/h	Floor space m2
XSG-2	200	250×2800	5-9	300-800	10-20	3500*2500
XSG-3	300	400×3300	8-15	600-1500	20-50	3800*2700
XSG-4	400	500×3500	10-17.5	1250-2500	25-70	4000*3000
XSG-6	600	700×4200	20-29	2500-5000	40-200	4250*3250
XSG-8	800	900×4600	24-35	3000-8000	60-600	4500*3500
XSG-10	1000	1100×5000	40-62	5000-12500	100-1000	4750*3750
XSG-12	1200	1300×5200	50-89	10000-20000	150-1300	5000*4000
XSG-14	1400	1500×5400	60-105	14000-27000	200-1600	5250*4250
XSG-16	1600	1700×6000	70-105	18700-36000	250-2000	5500*4500
XSG-18	1800	1960×8000	85-120	19500-42000	300-3000	8000*7000