Home  >  Packaging Machinery  >  Labeling Machines

WT-A30 Ripple Cup Sleeve Wrapping Machine, Speed: 40-50 pcs/min, Warranty: one year - details see: https://www.machineto.com/wt-a30-sleeve-making-machine-chocolate-wrapping-machine-ripple-cup-sleeve-wrapping-machine-10057963

Welcome to Wenzhou Qichen Industry & Trade Co.,Ltd.

Quality and the after sell service is our aim: we do not only sell the prodcuts but solutions.We believe that you will be satisfied with both our products and service.

WT-A30 Ripple Cup Sleeve Wrapping Machine:

Technical Specification:

Model	WT-A30 Ripple Cup Sleeve Wrapping Machine
Paper Bowl Size	20 oz-50 oz (mold exchangeable) height up to 125 mm
Raw Material	170-450 GSMPE paper, varnishing printed paper, or other film coated paper (can be sealed by ultrasonic)
Rated Productivity	40-50 pieces/minute;
Power Source	220V/380V/ 50Hz or other required
Total Power	4 KW
Total Weight	1000KG
Package Size(L x W x H)	2450 x1200 x2000mm;
Working Air Source	0.6Mpa, Air Out-put:0.3 m3/minute
Available to make machine against your requirement.

The part we used VS normal one:

1) We use 125 type gear box, which has two years warranty.

Normally, 100 type gear box is used.

125 type is much bigger and stronger than 100 type.

100 type gear box, if used for one year, is easier to have problem.

2) We use 1:30 100 type Speed reducer

Normally 1:20 80 type speed reducer is used.

1:30 100 type speed reducer is more stable than1:20 80type speed reducer.

The speed reducer and the gear box are very importantto the machine.They control the whole machine, if there are some problems with these two parts, then, you have to change the gear box and speed reducer. In this case, the machine should be taken apart, because they are inside the machine. It takes much time, and sometimes you cannot install the machine correctly. So it is necessary to use better gear box and speed reducer.

3) We useφ30 import steel shaft for the machine.

Normally φ25 steel shaft is used.

φ30steel shaft has longer life and is resistant to wear.

4) We use two times paper feeding process.

Normally one time paper feeding process is used.

Two time feeder make feeding and folding has more time to done process.

Paper fan not easy corrugated when fan goes folding process.

6) We usemultilayer suckers for the paper taking

Normally single sucker is used.

Multilayer sucker is much powerful and make the process successful.

Multilayer sucker has long life; when the top is wornout, just cut the top.

The paper cup produced by Ripple Cup Sleeve Wrapping Machine is bonded well and the bottom of the cup is double bonded. It can hold the water better.

If you are interested in our Ripple Cup Sleeve Wrapping Machine, welcome to contact me~

tiffany.wu54

Ripple Cup Sleeve Wrapping Machine Ripple Cup Sleeve Wrapping Machine