Home  >  Wood Working Machinery  >  Woodworking Machinery  >  Wood Shaving Machines

wood shaving machine for animal beds, 1)for farm plant animal bedding, 2)maintanence simple, low noise, 3used as biological fuel - details see: https://www.machineto.com/wood-shaving-machine-for-animal-beds-10355893

shaving machine for wood

shaving machine for wood main component

It includes rack, placed in a rack on the platform, the turret fixed platform, timber feed inlet into the machine, inside the machine blade slice shot shavings, shavings size, out of uniform thickness, and wood The factory manual shavings there is no difference.

Usage and introduction of shaving machine for wood:

1) Wood shaving machine is mainly used for mass production of uniform thickness sheet shavings, 2)Machine can be used make Particleboard (plywood), wood pulp paper mills do raw materials

2) Transportation companies do fragile transportation filling for small pig, cattle, sheep and various animals nest do fillings can also used for bioenergy.

3) The machine is capable of logs, branches (branches), board edges processed into shavings produced shavings shavings and furniture factory produced.

4) Fully automatic feeding equipment, greatly improving the speed of production, but also saves time and manpower.

5) The machine is automatically crushed processed wood into wood shavings equipment, raw materials from the inlet into the first blade cutting into the crushing chamber, crushed by high-speed rotation of the hammer impact and shear knife appointment, then by the built-in FAN a wind generated by the screen sends the feed port or external fans pumping spout.

6) The shavings Size is determined by adjusting the blade length and mesh aperture size to accommodate a variety of needs.

Common Faults and Solutions in Usage:
(1) 1: The use of wood shavings mill belt easy to bite with:

Solutions: Because the motor rotor and wood shredder rotor different heart, left and right movement motor position, or at the the motor bottom foot of surface padded to adjust the two-rotor concentric degrees.
(2) The the wood shavings output low

Solutions: not sharp blade or knife is not adjusted to the appropriate location. Solution: Remove the knife, sharpening the piece, adjust the blade to the appropriate location of the chip.
(3) Feeding difficulties, knife-chip difficult.

Solutions: because :knife badly worn, the fixed knife the gap is too large or too small. Solution: sharpening the pieces to ensure a sharp blade. Adjusted fixed knife gap 2-3mm, the blade angle can not be larger than 30 °.
(4) feed too fast machine crashes.

Reasons and Solution: feed the pace is uneven, the blade is not sharp. uniform, does not exist in the guarantee smash positions within the material feed. Sharpening the piece, so the knife chip speed.
(5) Bearing heating.

Reason and Solution: chock butter, bearing seat is not installed flat bearing damage. Tight belt installation. Solution: bearing within plus butter, bearing the school balance, a new bearing, adjust the belt tension, so that the device is working properly.
The wood shavings equipment mainly by the usual maintenance:
Should adjust the belt tension (1) daily use, a decrease of 6-10mm suitable.
(2) to clean up the inside of the machine, can not be left over from the last time produced crushed material.
(3) chock timely filling of lubricating oil, filling lubricating oil 3-4 hours of continuous work, should be observed.

Application & Special Usage

1. Animal Bedding; Transportation Bedding

2.Flake board, Pallet Leg Excellent drying function. Bedding is softer and more comfortable,which makes much healthier.Cleaning livestock easier and economical.

3.Adjustable Size,Reasonable Price, Good Quality ,Simple operation

4.Convenient maintenance with lower cost

Specification

Model	KN-MXJ-420	KN-MXJ-600	KN-MXJ-800
Blade No. (piece)	4	4	4--8
Main shaft speed (r/min)	500	450	400
Main power (kw)	7.5--11Kw	15-18.5	30--37
Capacity (kg/h)	300	500	1000
Weight (kg)	200	380	800

Description

Best selling Wood shaving machine can make the logs, tree branch edge processed wood into wood shavings. The shaving is the same as that produced from the furniture factory, the automatic feeding equipment, greatly improved the speed of production, and also saves time and manpower. The wood shaving thickness can be adjustable .

Applicable for :particle board ,paper producing ., wood pulp paper making , also can be used as biomass fuel

Advantages

1)CE&ISO certificate;

2)Long service life

3)Low noise,cover place saving,little invest and more return

4)Simple operation

Contact information:

Company name	Zhengzhou Known Imp.&Exp.Co.,Ltd
Contact person	Monica
Email	monica(at)knownmachine.com
Mobile phone	0086-13673370581
MSN	monica-gao(at)live.com
Skype	Monica-gao2011
Tel	86-0371-55607080

Any questions,please contact Monica Mobile:0086 13673370581

More photos of machine

Other color wood shaving machine

Contact information