Home  >  Wood Working Machinery  >  Woodworking Machinery  >  Wood Debarker

Wood peeling machine|Wood Skinning Machine, 1.low energy consumption, 2.low failure rate, 3.noise is much lower - details see: https://www.machineto.com/wood-peeling-machine-wood-skinning-machine-wood-barking-machine-wood-barker-wood-peeler-10351314

Wood Peeling Machine|Wood Skinning Machine|Wood Barking Machine|Wood Barker|Wood Peeler

Peeling machine description:

1, the use of open hopper, a feed from the other end of the assembly line-style operation the material to overcome the existing roller peeling machine power feed, the material, the shortcomings of segmented work efficient.

2, the section of the teeth on the impact of wood, not only do wooden section of circular motion in the chassis, and turn itself around, so peeling efficiency. hard peeling stripping rate was better.

3, the adaptability of the wood, and can be of different tree species, diameter, length and shape to carry out the peeling wood, wooden section of the rotary motion and irregular beating to do, so the concave curved section of the Ministry of wood can be very good teeth and peeling contact. Therefore, the net rate of bending wood stripping is much higher than the other roller.

4, due to the huge housing is fixed, so the low energy consumption, low failure rate, repair work is small, vibration and noise is much lower than the confidential skinned drum, the machine can produce ground, even without the base installation ,easy to use.

Open peeling machine Technical parameters:

Model	LGMC-8
Diameter	20-500(mm)
Peel rate	>90%
Dimension	9*1.95*1.65m
Weight	4.5 T
Capacity	12-15 T/H