Home  >  Wood Working Machinery  >  Woodworking Machinery  >  Wood Debarker

1.ISO9001:2008 and CE, 2.High peeling rate,low consumption, 3.Single roller or double roller debarker, 4.Long working life - details see: https://www.machineto.com/wood-log-peeling-machine-wood-debarker-wood-peeler-10351107

Brief Introduction ofwood barking/peeling/debaker machine

Wood Barking/peeler machine is suitable for large,medium and small paper mills, pulp mill, wood factory, wood processing plant, forestry factory, timber yard, artificial board factory (such as plywood plant, medium density fiberboard factory etc.).

The rotor with barking teeth produce unique forces,which make cutlog and cutlog,cutlog and silo rub, impact, extrusion, pinch so that the bark fastly separate to achieve the effect of high rotor barking machine.

Working Principle ofwood barking/peeling/debaker machine

a.Put the log and tree branches into the rotary drum,close the feeding baffle,then start the machine,with clockwise operation,the cutter will strip wood skin.

b.Fifteen minutes later,stop the machine,open discharging baffle, then start the machine and counterclockwise run two minutes,the peeled wood can be automatically sent out by roller

c.The peeling rate could reach 95%.

Applicable Scope ofwood barking/peeling/debaker machine

Wood Peeler is suitable for peeling the skin of freshcut soft wood,some leaved wood,the frozen wood and drywood.

Parameters of wood barking/peeling/debaker machine

Specification(single roller)	6Meters	9Meters	12Meters
Capacity(t/h)	5-10	10-15	15-25
Power(kw)	7.5*2	7.5*2	7.5*2
Length(mm)	6300	9000	12600
Width(mm)	1310	1500	1500
Height(mm)	1550	1700	1700
Weight(t)	3	4	7.5

Specification(double rollers)	6Meters	9Meters	12Meters
Capacity(t/h)	7-15	15-25	25-30
Motor power(kw)	7.5*2	7.5*2	7.5*2
Length(mm)	6300	9000	12600
Width(mm)	1310	1500	1550
Height(mm)	1550	1700	1650
Weight(t)	4	5	8

Note: The above technical parameters are just for your reference.