Wood cnc router process center
Wood cnc router process center, 1.Imported square orbits, 2.Germany ballscrew, 3.DSP control system, 4.Vacuum suction - details see: https://www.machineto.com/wood-cnc-router-process-center-10357812
Place of Origin:Shandong China (Mainland) | Brand Name:Hongda Boke | Model Number:1325 |
Wood cnc router process center
technical-parameters:
Model | HD-1325 |
XY working area | 1300x2500mm |
Z working area | 200mm |
Table size | 1480x3000mm |
Max feeding | >25m/min |
Work-holding | By suction |
Processor | DSP/Frequency 100MHz |
Interface | USB |
Command | G code*.u00*.mmg*.plt |
Surroundings for software | DSP |
Power(not include the spindle) | 1840W |
Working voltage | AC358V/50Hz |
spindle power rate | 4.5KW(domestic water cooling) |
spindle rotating speed | 0-24000rpm/min |
Drive motor | steper |
Features:
*Adopt FUNUC numerical control system ,high precision high speed.
*Imported four-race ball, widen linear guide rail, self-lubricating slippers. Equally pressed, high precision and strength.
* Z working area can be increased to 1m, large working area ,suitable for super thick material.
*Intelligent processing , slop over defencive function, avoid collision during the wrong design.
*Multiple unit control, separately control speed with and without processing ,highly increased the efficiency.
Configuration:
SAMPLES:
Thank you for your visitingHongda Boke!
Packaging Detail:wooden case |
Delivery Detail:15 days after deposit |