Wire Mesh Welding Machine

Wire Mesh Welding Machine Large joint strength, firm welded point without welded tracks, smooth final meshes. Automatic straight - details see: https://www.machineto.com/wire-mesh-welding-machine-10140645

Place of Origin:Beijing China (Mainland)	Brand Name:CONET	Model Number:CN-HW	Primary Voltage:380V
Rated Duty Cycle:12	Rated Capacity:120KVA	Dimensions:15200x3500x2000mm	Usage:Welding

Wire mesh welding machine

Introduction

This automatic wire mesh panel welding machine line is for the changeable diameter. PLC controlled system and touch screen make the machine line easily to operate. All the components used are with famous brand both at home and aboard, they guarantee the machine has perfect performance and high quality as well as longer useful life.

Features:

1. this kind of machine is an expert to produce mesh panel. The finished mesh is much smoother than mechanical machines product.

2. PLC controlled. Easy to set and control. It makes this machine more intelligent and reasonable.

3. the weft wire supply is automatic

4. The greatest advantage is possible to adjust the distance of weft wires at random on the same mesh panel.

5. The welding wire diameter is able to be made to orders. The range of our mesh welding machine is from 0.3mm to 12mm. Material can be stainless steel wire, galvanized wire, plain steel bar, cold rolled rebar, hot rolled rebar.

6. The machine line automatic degree can be according to request. For the economical type, line wire and cross wire are pre strengthened and cut to length. We capable to produce fully automatic machine.

Main parameters

Wire mesh panel width	≤2600mm
Wire mesh panel length	Any length
Wire diameter	φ3-φ8mm
Line wire distance	50-300mm
Cross wire distance	>=10mm
Welding speed	60-120 rows /min
Voltage	380V 50Hz
Compressed air	0.8MPa 6m³/min
Wire material	Low carbon steel wire
Wire surface status	Clean surface, steel wire or galvanized wire
Wire wastage	0%