Home  >  Industrial Supplies  >  Refrigeration & Heat Exchange Parts

Wire Fridge Condenser:, 1.Refrigerator Wire On Tube Condenser, 2.Fridge Wire On Tube Condenser, 3.WOT Condenser; Ice Box Conden - details see: https://www.machineto.com/wire-fridge-condenser-10247343

Wire Fridge Condenser

Refrigerator Wire On Tube Condenser; Fridge Wire On Tube Condenser; WOT Condenser; Ice Box Condenser;

Raw Material	1)Rolling welded steel tube : OutDiameter 4.76mm-6.35mm , Wall Thickness 0.6-0.7mm;
	2)Low carbon steel wire O.D.1.4-1.5mm ;
	3)Bracket:Steel Plate (SPCC),thickness 0.6-1.5mm;
	4)Steel Plate:SPCC with thickness 0.3-0.4mm;
Structure	1)Flat Type of wire on tube condenser used at the back ;
	2)Bended or Spiral type of wire on tube condenser used at the bottom;
	3)Wrapped type of tube embed on plate;
Key Process	Tube bending, Tube welding, Fix the bracket, Weld the suction tube, Leakage Test, Coating,Folding or bending, Shaping, Inspection, Package
Technical Ability	1)Wire Pitch ≥5mm;
	2)Produce according to the drawing or sample supplied by clients;
Performance	1)Surface with electrophoresis coating to prevent the corrosion
	2)Inner cleanness can meet the requirement of R134a &CFC cooling system;
	3)Can satisfy the cooling capability requirements;
	4)Producing Capacity: 5000 Set/Day;
R134a Cooling System Tube Inside Standards
Residual Moisture	≤20 mg/m2
Residual Impurity	≤30 mg/m2
Residual Mineral Oil	≤7 mg/m2
Residual Chlorine	≤0.3 mg/m2
Residual Paraffin	≤0.2 mg/m2
Specification of Coating
Coating Thickness	Thickness of cathodic electrophoresis coating ≥12 um
Harness of Coating	≥2H
Impact of Coating	50 cmkg/cm impact, no crack
Adhesion of coating	≥ two grade
Flexbility of Coating	Around R=3D bend 180°,no crack or no fall off
Color tolerance of Power Painting	E ≤ 1.5
Corrosion Resistant (Salt Spray GB2423)	Cathodic electrophoresis ≥ 96H