wide belt double heads wood sanding machine

1.Used for power calibration sanding and polishing on various boards such as solid wood doors,veneer board ,particle board etc . - details see: https://www.machineto.com/wide-belt-double-heads-wood-sanding-machine-10343190

Condition:New	Place of Origin:Shandong China (Mainland)	Brand Name:Linze	Model Number:BSG2213
Conveyer Belt Speed:4-30m/min	Size of Abrasive Belt (WP):13202200mm	Total Motor Power:56.62kw	Working Air Pressure:0.5MPa
Working Length:Not Less Than 200mm	Overall Dimensions:210025301980mm	First Abrasive Belt Speed:20m/s	Second Abrasive Belt Speed:18m/s
max. working width:1300mm	working thickness:2.5-80mm

wide belt double heads wood sanding machine

Woodworking machine

Sanding machine

Wide belt sander with double units

standard configuration :

1. The feeding belt come from Holand AA belt.

2. The bearings come from Japan NSK

3. Electric parts select Taiwan AIRTAC, Siemens,Chengtai.

4.The machine electronic control have overload, with low pressure, flow, defaultphase protection, if any above fault arise , equipment will be automatically stop, and emergency braking, to get the best production safety protection.

5. If the conveyor belt pulling to one side ,it will be automatic centering , doesn’t need manual adjustment.

6. Table lift control mode: microcomputer automatic control lifting.

7. Feed belt speed regulating mode and scope: stepless speed adjustment, for 3-30 / min.

8. Dust collection mouth diameter: Φ200 four, Φ150 one

9. Working pressure: > 0.55 MPA, dust collection average speed: 25m/sec.

This machine can be used to polish various board by giving thickness and it suits to polish solid board, veneer board, shaving board, middle-density fibrous board etc. This machine index is advanced and it is in high precision ,reasonable composition, modern construction and convenient operation. It has the world advance level.

Pictures of wide belt double sanding machine

Machine details

Adopt two pressing roller, which can avoid working piec

e to slide to decrease friction between the piece and the feeding belt.

Machine controller : You input workign thickness ,which will actomatic adjustment .When using it very convenient .

F.R.L unit adopts AIRTAC from Tai Wan to supply clean air

When the machine running ,the belt will automatic centering ,do not need to asjust by manual .

speed reducer system ensures the stability of feeding

Conveyer belt imported from Holland AA belt has bigger friction force and fine planeness. Brush roller is made from sisal against static and adsorption of dust.

Technical Data

Model No.		BSG2213R-RP
Working Width		1300mm
Working Thickness		2.5--80mm
Working Length		Not Less Than 200mm
First Abrasive Belt Speed		20m/s
Second Abrasive Belt Speed		18m/s
Third Abrasive Belt Speed		--
Conveyer Belt Speed		4-30m/min
Size of Abrasive Belt (W*P)		1320*2200mm
Motors Power	Total Motor Power	56.62kw
	First Unit Motor	30kw
	Second Unit Motor	22kw
	Third Unit Motor	--
	Feeding Motor	4kw
	Brush Motor	0.37kw
	Lifting Motor	0.37kw
Hardness of First Roller		Steel Roller
Hardness of Second Roller		85°
Hardness of Third Roller		--
Working Air Pressure		0.5MPa
Overall Dimensions		210025301980mm
Net Weight		3400kg