Home  >  Farm Machinery  >  Farm Machinery  >  Oil Pressers

Hydraulic Oil Press, 1.Automatic hydraulic oil press, 2.capacity:40kg/h, 3.oil residual:7%-8%, 4. stainless steel - details see: https://www.machineto.com/wholesale-reasonable-price-hydraulic-oil-press-10190074

Hydraulic Oil press

Introduction of Wholesale Reasonable Price Hydraulic oil press

Description of hydraulic oil press:

1.Saving labor: it can save 60% labor for equal output and 40% labor cost per day for one or two people are able to make production.

2.Widely-used: it can be used to completely press more than 20 kinds of oil crops, such as peanuts, sesame, vegetable seeds, soybean, oil sunflower and flax by third levels for one time.

3.Pure oil quality: the vacuum oil filtering is used to remove residue so as to ensure the pure oil quality and meet the standard of health quarantine.

4.Small land-using: an area of 10-20 m2 workshop can meet the need of production.

Three mainly parts of hydraulic oil press:

—— main engine

—— hydraulic system

——electrical system

Main engine includes base, upright, top plate, oil drip pan, nut and etc. which is one of the main parts. when the oil material is put into the assembly of the press boring, then it being dried up by the oil cylinder piston, oil will be outflow from the gap of press boring and then pass the oil drip pan to the drum for oil storage.

The advantages of hydraulic oil press are as follows:

• It is this is a kind of hydraulic oil press machine,
• Which can press sesame, walnuts, almonds, and other high oil crops.
• This is machine is very suitable for family using and small scale oil factories.
• It is can press 7-8kg per time (12 minutes), that is to say you can process about 50kg/h.
• After pressed, the oil is very pure with good smell, can be edible for people directly.
• It is durable using, which is the least to change the wearing parts.
• It is made of stainless steel, so the oil can reach the healthy standard, Which is good for people health.

Operate flow of hydraulic oil press, as follows,

1. Ready the seeds

2. Adjusting the machine, such as, electricity, heating (if you cold pressing, do not need open heating)

3. Open the machine, putting seeds into the feeder,

4. Seed into the screw bolt , beginning of pressing

5. The crude oil is out of the squeezing bolt, then flowing into the board ,

6. Then into the vacuum filter, using it for filtration

7. After filtration, the oil is out of the bottom of pipe

8. It is OK

Technical parameter of hydraulic oil press:

Type	6YZ-260
Size(L×W×H)	870×780×1350mm
Weight	850KG
KN Pressure	1900KN
Max Work Pressure	55Mpa
Heating Ring Power	2KW
Heating Ring Control Temperature	70-100°C
Sesame Feeding / Time	7-8KG
Motor Power	Y901-4 1.5KW

Inner parts of hydraulic oil press:

Hydraulic oil press