Home  >  Farm Machinery  >  Farm Machinery  >  Shellers

Whole process for apricot shelling and sorting, 1.kinds of nuts cracking, 2.nuts shelling and sorting, 3.capacity 1ton/hour - details see: https://www.machineto.com/whole-process-for-apricot-shelling-and-sorting-10188684

Palm kernel nuts shelling machine, palm kernel nuts cracking/breaking

Palm nuts hard shell cracking machine, Argania spinosa deshelling and cracking,Hazel nuts hard shell breaking machine, apricot pits shelling machine,Almond dehuller, peach pit cleaving machine, palm nuts deshelling machine with large capacity, palm fruit shelling machine

Features and introductions:

Whole process for apricot cracking and sorting

I: the purpose and the working element

1, This machine professional use for broken the hard shell ,like the apricot and filbert, almonds, hazel nuts, peach pit nuts, palm nuts ,etc

2, To change the distance between the rollers of this machine ,can broken the different size shell of the nuts products

3, Because the size of the shell is different, so it is better to broken the big size , then broken the smaller size .

II: The structure and the capability

This machine consist of the feeding , the conveyor, the rollers ,the cracking machine . use the belt to run .

III: The detail information

1, Dimension:3200×2100×2600(length*width*height)

2, Power:6.75KW/380v/50Hz

Small size power: 2.2kw /380v /50hz

VI: The manual book

Before use this machine , should check the products size ,then adjust the distance between the rollers ,make three different level , the roller distance should be less than the shell about 1-1.5mm .

1, After the roller distance is adjust ,can running the machine ,the flowchart of running the machine is : the shaking machine ---the third class roller ---the second class roller ---the first class roller ---the conveyer –the feeding ..

2, First feeding should be a little ,check the roller first ,if the seeds broken more ,should stop the machine and adjust the roller again .until the machine running good .

3, If need to stop the machine ,should stop the motor first ,then is conveyer ,the first class roller ,the second class roller ,the third class roller ,the last is stop the shaking machine .

V: Attention

1, In the working time ,the conveyer is easily run a wrong way ,so please check it and change the screw in time .

2, Should add the lubricant on the belt ,bearing ,and check the screw on time .

Technical parameters:

Cracker machine:

Model: TK-01

Capacity: 800-1000kg/hour

Power: 380v/6.75kw

Cracking rate: >95%

Broken rate: <1%

Main machine dimensions: 3100*2000*2150mm

Elevator dimensions: 4650*500*400mm

Barrel dimensions: 1000*1000*1000mm

Total weight: 1900kg

Separating machine:

Model: FL-01

Capacity: 200-300kg/hour

Power: 2.2kw

Separating rate: >98%

Dimensions: 1970*920*1350mm

Weight: 230kg