Home  >  Industrial Supplies  >  Industrial Air Conditioners

Cooling capacity from 4.77 to 140 kW, Heating capacity from 5.1 to 163.9 kW, Model: LWWHRPC, T3 condition - details see: https://www.machineto.com/water-source-heat-pump-10223425

Structure
Panels and frame are made from galvanized steel protected
with polyester powder painting to ensure total resistance to
atmospheric agents
Hermetic compressor
Single phase rotary type (mod.05 to 07), single phase
(mod.08, 10, 12) and 3-phase (mod.08 to 140) scroll type
compressors, with built-in thermal overload cut-out and
crankcase heater, mounted on rubber vibration dampers
Evaporator
High efficiency plate type heat exchanger, factory insulated
with flexible close cell material
Condenser
High efficiency plate type heat exchanger, factory insulated
with flexible close cell material
Desuperheater
High efficiency stainless steel brazed plate heat exchanger,
factory insulated with flexible close cell material
Refrigerant circuit
Copper tube connection with charge valves, filter drier,
thermostatic expansion valve (capillary for mod.05 to 14),
gas-liquid separator, high pressure switch and low pressure
switch
The heat pump units are complete also with 4-way valve and
one way valve
Hydraulic circuit
Built with user side and source side water inlet/outlet
connectors, water discharge connectors, air vent valve
(mod.05 to 30 the user side is complete also with expansion
vessel, water pump and flow switch. )
Electric panel
Consists of:
♦ Compressor contactor
♦ Compressor protection breaker
♦ User side water pump contactor (for mod.05 to 30)
♦ User side water pump breaker (for mod.05 to 30)
♦ Microprocessor with function display
Optional
♦ Sight glass which must be installed in factory
♦ Source side flow switch
♦ Source side water pump
♦ Anti-vibration rubber
♦ Metallic filter for the water circuit
♦ Heat recovery exchanger
♦ Tube in tube heat exchanger