Waste Oil Distillation Filteration

Waste Oil Distillation Filteration

Series HCY Waste Oil Pyrolysis (Oil Distillation) equipment is special for regenerating the black waste oil, including waste engine oil, lube oil, hydraulic oil, gear oil, dirty diesel oil, mixed oils etc. HCY machine effectively transfer waste oils to diesel oil under Pyrolysis, HCY works under 580C temperature, makes Hydrocarbon molecules break out, and re-order combination, forming diesel oil .During the distillation process, liquid waste oil transforms to oil-gas in distillation tank under high temperature, then oil-gas transform to liquid oil again after the cooling system, the liquid oil treated by the special tanks to desulfurize and decolor.

Series HCY machine is energy-saving, environment friendly machine, during the process it just generates less waste (sludge), the waste (Sludge) doesn't contains any oil, so it is no pollution for the environment (The waste/sludge also can be processed into a carbon toner for printing the raw materials); During the oil regenerating process, the oil-gas and low volatile are discharged after combustion of hydrocarbons and purification treatment, so, there is no odor and no environment pollution.

Oil DistillationAdvantages:
1, HCY Regenerating way is under high temperature distillation (80C to 580C), making oil from liquid states to gaseity states. Different temperature will produce different density diesel fuel oil.

2, HCY Heating device are optional, there are oil-burner furnace, natural-gas furnace, also you use the coal furnace, the burning material is fuel, natural gas and coal. For the fuel, it can be the final product from HCY machine (diesel oil), HCY machine does not use electric heater, It saves much energy and cost compare with electricity heater.

3, HCY machine don't add any chemicals during the distillation process, HCY process is a Pyrolysis way.

4, HCY machine is friendly environment, it produces less sludge, the sludge is purity carbon materials without any oil, and the sludge can be processed into a carbon toner for printing the raw materials.

5, The decolor materail can be used again , Silica recovery ratio above 97%

6. Activated carbon recovery ratio above 95%

Technical Data:

.