Home  >  Industrial Supplies  >  Industrial Filtration Equipment  >  Other Industrial Filtration Equipment

Replaced various engine oil, the plant processing oil, and other oil system scrapped regeneration treatment of lubricant oil. - details see: https://www.machineto.com/waste-engine-oil-distillation-machine-10229686

The principle of theengine oil distillationsystem:Keep the harmful part liquid and solid, the useful base oil become vapour state, separate from each other to get the useful parts.

The technical of theengine oil distillation system:Vacuum pressure method, long path retention method and so on to regenerate thewaste engine oil.

The parts of the system:1.Waste engine oil pre-treatment system, 2.Vacuum distullation system, 3.Fine treatment and Blending system( should be ex-quotation)

1.Waste Engine Oil Pretreatment System: It is made up of primary filter, heater, pretreatment oil tank, pending oil tank, oil pump, vacuum source and other parts.

In this process, the oil needed to be treated will accomplish dehydration and degassing process, ready for next step of distillation.

2. Decompression andDistillation System: It is made up of heater, compressing distillation tower, recycling pump, oil recovery device, oil-purified pump, highly speed and low vacuum machine set, cooler, etc.

In this process, the useful elements and waste components of the waste oil will be separated.

3. Polishing and reconciling system: It is made up of fine filter and additive blending tank.

As the customers have different and specified requirements, the usages of base oil got after treatment are different. This system will be customized according to customer’s different needs.

The feature of theengine oil distillation system:

1. It is not onlywaste oil regeneration systembut also an Environmental protection and energy saving project which is benefit to mankind
2. No chemical additives were introduced in processing, which leads to low operation cost
3. Due to the adoption ofvacuum distillationtechnology, the oil temperature is far below than the boiling range under atmospheric pressure. It reduces the energy consumption and saves expenses during processing.
4. Use the waste oil as the cooling medium, to make the oil hot for the pre-treatment, also cooling the system. Save the water also.
5. The whole system is reasonable structure, simple operation and easy maintenance and the treatment of residues can be used as fuel or for other purposes

6. Direct heating is improving work efficiency, reducing the heat loss and saving energy

7. If need to heat waste oil in other ways, please indicate when ordering