W24s-100 profile bending machine

section bending machine, profile bending machine, hydraulic drive, can bend I beam, H beam, U beam,angle steel,soild bar, pipe - details see: https://www.machineto.com/w24s-100-profile-bending-machine-10123415

Condition:New	Place of Origin:Jiangsu China (Mainland)	Brand Name:YINLI	Model Number:W24s-100
Machine Type:section bending machine	Raw Material:Sheet / Plate Rolling	Material / Metal Processed:Carbon Steel	Power:Hydraulic
Automation:Manual	Certification:CE

Project of Section Bending Machine

1.Model:W24s-100

2.Brand:<YINLI>

3.Model:W24s

4. Character
--Three driven rollers

--bending rolls are high tensile alloyed forget steel, heat treated

--all welded steel frame, heavily proportioned and stress relieved

--digital read outs for the position of the lower rolls

--The three-roll double-pinch type uses one fixed roll and two moveable rolls. Rolls adjust to bend symmetrically or asymmetrically and pre-bend both ends of the work piece in a single pass. Bending distance-the distance between the tangent contact points of the rolls- increases with diameter rolled, broadening the capacity of the machine.

--guide rolls are hydraulic driven and adjustable in up/down

--shafts in alloyed steel, heat treated and grinded, mounted on long life grease lubricated self-alignment spherical roller bearings

--with emergency stop buttons

-- All motors have corresponding breaker to protect for short circuit caused by over electricity

--All motors have corresponding heat relay as protection against overload

5. Parameters

PARAMETERS: W24S SECTION BENDING MACHINE

		W24S SECTION BENDING MACHINE
Material yielding limited		σ_S≤245MPa
Model		W24S-6	W24S-16	W24S-45	W24S-75	W24S-100	W24S-140
Max. Section Modulus		6cm³	16cm³	45cm³	75cm³	100cm³	140cm³
Angle leg-out	Max. cross section (mm)	50x50x5	80x80x6	100x100x10	120x120x10	125x125x14	140x140x16
Angle leg-out	Min. bending diameter (mm)	500	1500	1600	2000	2200	2400
Angle leg-in	Max. cross section (mm)	50x50x5	70x70x6	90x90x10	110x110x10	125x125x14	140x140x16
Angle leg-in	Min. bending diameter (mm)	500	1500	1800	2400	2500	2600
Flat-along face	Max. cross section (mm)	50x10	75x16	80x25	110x40	120x40	120x40
Flat-along face	Min. bending diameter (mm)	500	800	1000	1500	1600	1800
Flat-along edge	Max. cross section (mm)	100x15	150x25	250x30	220x40	250x40	280x50
Flat-along edge	Min. bending diameter (mm)	1200	1200	1400	1500	1500	1800
U-beam leg-out	U-beam model	8	12	20	22	25	30
U-beam leg-out	Min. bending diameter (mm)	1000	1700	2000	2000	2500	2600
U-beam leg-in	U-beam model	8	12	20	25	25	30
U-beam leg-in	Min. bending diameter (mm)	1200	1500	2500	2500	2800	3000
Solid bar	Diameter (mm)	Ø25	Ø50	Ø7 0	Ø80	Ø90	Ø100
Solid bar	Min. bending diameter (mm))	600	800	1000	1200	1500	2000
Pipe	Diameter x pipe thickness (mm)	Ø40x4	Ø76x4	Ø 80x6	Ø89x10	Ø90x10	Ø125x10
Pipe	Min. bending diameter (mm)	600	800	1000	1400	1800	2000
T-beam	Width(height) x thickness	35x5	70x6	90x10	100x10	120x12	140x12
T-beam	Min. bending diameter (mm)	600	1500	1800	2000	2400	2500
I-beam	I-beam model	6	8	10	16	16	20
I-beam	Min. bending diameter (mm)	1200	1800	2000	2200	2200	2600
Square	Width x thickness	45x3	60x4	80x6	90x8	100x10	125x10
Square	Min. bending diameter (mm)	750	900	1200	1600	200	2500
Rectangular	Length x width x thickness	20x30x2	50x30x4	60x40x4	100x50x5	100x60x5	140x60x6
Rectangular	Min. bending diameter (mm)	1000	1200	1500	1800	2000	2500
Rolling Speed	5m/min
Hydraulic pressure	20MPa
Main motor power		2.2KW	7.5KW	7.5KW	11KW	11KW	15KW