VM 400 milling machine
Condition:New | Place of Origin:Zhejiang China (Mainland) | Brand Name:haishun | Model Number:VM400 |
Type:Horizontal | CNC or Not:Normal |
Feature
l Small,fine and attractive machine ,flexible movement.
l The three axis hard rails guarantee the stiffness of machine.
l It can take great advantages to produce small mold and parts.
l Lathe work range will not be affected whether the workmount or the fourth rotational axle add-in due to extra-long workplace design.
l Y shaft supported by four rails which is rare in the same type lathes is used to increase the whole stiffness and work stability of the machine.
l Imported big BT-40 main shaft is mounted to make lathe excellent work performance.
VM 400 machine Technical Specification
Item | Unit | Parameter |
X/Y/Z axis travel | mm | 400/300/350 |
X/Y/Z guideway | Hard guideway | |
Table area | mm | 300*600 |
T-slot size | No.*width | 3*14 |
Table load | Kgs | 400 |
Spindle taper bore | # | BT-40 |
Spindle speed | Rpm | 6000 |
Distance from spindle end to table | Mm | 120-470 |
Spindle motor specification | Kw | 3.7/5.5 |
X/Y/Z axis rapid feed | M/min | 12/12/10 |
Triaxial cutting feed | Mm/min | 1-4000 |
X/Y axis motor specificaion | Kw | 1.5/1.5 |
Z-axis motor specification | Kw | 1.5 |
Positioning accuracy | Mm | ±0.008 |
Repeat positioning accuracy | Mm | ±0.004 |
Pressure requirement | Kg/c | 6 |
Numerical controller | Great150iM/Siemens802S/802DSL1/ Fanuc0i mate TD/ Fanuc 0i mate TC (optional) | |
Weight | Kgs | 2500/2700 |
Machine size | Mm | 1800*1600*2300 |
u Our company reserves to improve the product but change the design and specification right, forgive then not another line circular,the product setting is based on the technical agreement signed by each other.
Standard Configuration
l Full-closed shield
l Taiwan lead screw
l Taiwan spindle
l Imported bearing
l Automatic timing and quantitative
l Automatic lubrication system
l Moveable hand wheel
l Thread and pad horizontal adjustment
l Electric equipment hot-exchange system
l Voltage changer
Special Accessory
l Tool magazine:umbrella type /disc type
l ATC with 12/16/24 tools (optional)
l Main shaft oil-cooling system
l Main shaft center yielding-water system
l The fourth shaft NC division head
l Chain type / spiral type chip remover device
Packaging Detail:WOODEN CASE |
Delivery Detail:30-60DAYS |