Home  >  Wood Working Machinery  >  Woodworking Machinery  >  Carbonization Stove

drying furnace, 1.low investment, big profit, 2.energy-saving, 3. easy to operate, 4. Novel design, stable performance - details see: https://www.machineto.com/very-popular-new-design-drying-furnace-carbonization-furnace-charcoal-stove-carbonization-10341488

new design drying furnace

Process:

1.One Carbonization Furnace could match with 2-3 inner pot to enlarge the capacity 2-3 times.

2.For each inner pot, from the briquette into charcoal, it takes about 6-8hours.

3.After carbonizing the first circle,the inner pots will put out and cooled outside. Then putting

another inner pots into the furnaces.

4.Only to ignite the first furnace, and the airflow produced by it will be enough to supply the

next furnaces. During this process, no smoke is released, and the hot air can use recycled which

is a good way to save time and energy.

5.And the furnaces are equipped with the lifting crane which can help you to put and discharge

the inner pots and charcoals easily. This is the largest capacity and new technology furnace for

briquettes.

some questions

ASK: 1. How does carbonization stove make charcoal?

Answer:

The surface of wood (bamboo, wood briquette, nut shell, etc) will ignite spontaneously

in the hypoxic condition. And this spontaneous combustion will produce heat. This

heat and the external heat source will heat the stove at the same time, when the

temperature reach 280 degree, the chemical structure of the wood will be changed by

the high-temperature, and after long time heating, changing and decomposing, then we will

get the black charcoal, combustible gas, and wood tar. This model furnace will use the

fume extraction tube to recycle all the combustible gas and smoking from the entire

heat source.

2.Why it is no pollution ?

Answer:

1. Smoking purification system are used for purify the smoking (can not burning) and

filter the wood tar. The smoking through the purification system will become water

vapor, and it will not pollute the air.

2. When during the process of carbonizing, there will be some smoke.(can be burning) the smoke can return to the furnace through tube for purifying, after

purification , the combustible

Brief introduction

1.This machine is used to carbonized the half-product into finished product.

1.It is equiped with hyperploid high temperature steam cooling system, and the process of cooling can be accelerated to

speed up the period of the production.

2.Carbonization furnace is a stove used to change biomass briquette into charcoal briquette.

3.The quality and efficiency of kiln affect final forming of charcoal briquette greatly.

4.This furnace is ideal equipment for wood briquettes to have anoxic distillation carbonization. Due to its rational

structure

5.the furnace only needs small quality of heat consumption.

Technical parameters:

capacity	0.8-1.5T
Furnace temperature	430°C
Charring volume	3-5m³
Matched motor	1.5KW
weight	5000kg

mechanism of carbon features:

Mechanism of carbon as an ordinary homemade charcoal, compared with a long burning time, high carbon content, high heat, heat, ash small, smokeless, odorless, non-toxic and so on.

mechanism of carbon technical parameters:

Moisture content	Carbon content	Ash content	Burning time	Heat	Volatile	Combustion temperature
0.98%	83.28%	3.68%	200Minute/kg	7.9KJ/KG	6.68%	880°C

We are professional, reliable, do not hesitate to contact us!

Proceed!!! If next millionaire is not you... then nobody!!!

Sales manager: Ally Yang

Mobile phone: 0086 1561 76609 68