Home  >  Construction Machinery  >  Building Material Machinery  >  Sand Making Machinery

Sand Making Machine:, 1.Adjustable products grading and product fine., 2.Cubic final product, 3.Fast delivery, 4.Reliable - details see: https://www.machineto.com/vertical-shaft-sand-making-machine-10082791

Introduction of Sand Making Machine:

PCL series vertical shaft impact crusher is also called sand-making machine, which is suitable for ores, cement, refractory material, carborundum, glass raw material, building sand, building stones

and metallurgy, slag industries.

Features of Sand Making Machine:

1. Simple structure and low investment cost.

2. Special bearing installing and advanced principle axis design, heavy duty and high rolling.

3. Having the function of fine crushing and coarse grinding

4. High reliability and good safety equipment

5. Smoothness of operation, low working noise, high efficiency and low consumption.
6. Slightly influenced by the moisture content of the material. The max moisture content is 8 percent.

7. Low damage. All parts are adopted high wear-resisting material at home and abroad,. Few wear parts are made by hard wear-resisting material with small volume, light weight, being easy to replace.

8. Vortex’s self-circulation inside and less dust pollution.
9.The lining materials in impeller and crushing cavity vortex greatly reduce the costs and maintenance

workload of wear parts. In production process, the stone material can form protection floor to protect

airframe off abrasion.

10. Variable installing methods and movable installment.

11. Cubic shaped finished products, high stack density, and low iron pollution.

Application of Sand Making Machine:

This series of sand-making machine is suitable to crush and reshape the flexible,mid-hard and very hard materials. It is widely used in mining, cement, fireproof materials, carborundum, glass raw

materials, building sand, building stones and many metallurgy, slag industries. It is much more

professional than other crushers in crushing hard and anti-abrasion materials such as

carborundum, sintered bauxite, magnesite and so on. It is usually used as sand-making

machine in the sand production line.

In civil engineering, this machine is an ideal production equipment in producing building sand,

padding material, pitch material, concrete material.
In mining , it is widely used in technology in the early period of grinding mill. It can generate a lot

of pre fines, reducing high-cost load of grinding mill.

Working Principle of Sand Making Machine:

The material enters into the sand-making machine via feed hopper. It will be divided into two parts by distributor: one part of the material enters high speed rotating impellerthrough the middle of distributor and was rapidly accelerated in impeller. The acceleration speed can achieve as hundreds

of times as gravity acceleration, then the part material is thrown out from the three impeller runners.

Technical Parameters of Sand Making Machine:

Model	Max. Feeding Size(mm)	Power (Kw)	Impeller Speed (r/min)	Capacity (t/h)	Overall Dimensions (mm)	Weight (including motor)(t)
PCL-600	35	22-55	2000-3000	12-30	2500×1600×2260	5.6
PCL-750	45	45-90	1500-2500	25-55	2780×1800×2700	7.3
PCL-900	45	90-180	1200-2000	55-100	3900×2160×2770	12.1
PCL-1050	50	150-264	1000-1700	100-160	4660×2450×3660	16.9
PCL-1250	50	264-360	850-1450	160-300	5600×2950×4000	22
PCL-1350	50	264-440	800-1200	200-360	5340×2940×3650	26

Note: Any change of technical data shall not be advised additionally.