Home  >  Chemical Process Machinery  >  Other Chemical Equipment

1.with heating jacket, 2.with stirrer/heated uniformly, 3.for paste,powder sensitive material, 4.no dead angles in tank - details see: https://www.machineto.com/vacuum-harrow-dryer-10299913

1.Features

Being adapted the big area heating way,its heat conducting area is large and its heat efficiency is high.

Being installed stirring in the machine, it makes raw material in cylinder from the state of continuous circle inside the cylinder, so the uniformity to be heated of raw material is raised geatly.

Being installed stirring in the machine, pulpiness, paste-like mixture or powder raw materials can be dried easy.

Using the newest Two-stage type reducer to reduce power consumption while increasing the torque.

2.Principle

It is an innovation horizontal batch-type vacuum dryer. The moisture of wet material will be evaporated by heat transmission. The stirrer with squeegee will remove material on hot surface and move in the container to form cycle flow. The evaporated moisture will be pumped out by vacuum pump.

3.Applications

The following raw materials from pharmaceutical industry, foodstuff industry, chemical industry and so on can be dried.

Suitable for pulpiness, paste-like mixture or powder raw materials.

Thermal sensitive raw materials having the requirement to dry at lower temperature.

Raw materials that are easy to oxidize or explode and have strong irritative or toxic.

Raw materials that need recover solvent.

4.Technical Parameters

Item		Specification
Name	Unit	500	750	1000	1500	2000		3000	5000
Working volume	L	300	450	600	900	1200		1800	3000
Size in the cylinder	mm	Φ600×1500	Φ800×1500	Φ800×2000	Φ1000×2000	Φ1000×2600	Φ1200×2600		Φ1400×3400
Stirring speed	rpm	10-15		10		8-10			5
Power	kW	2.2	2.2	3	4	4		5.5	7.5
Pressure of jacket	Mpa	≤0.3
Pressure in cylinder	Mpa	-0.09 ~ -0.096

Note: The evaporated amount of water its related to the characteristic of raw materials and the drying temperature. With renew products unceasingly, the related parameter will be exchanged, it dose not announce in advance, pardon!