Home  >  Chemical Process Machinery  >  Chemical Machinery & Equipment  >  Vacuum Drying Equipment

1. vacuum drying equipment suitable for drying thermal materials, 2. easy to decompose,polemerize and metamorphose - details see: https://www.machineto.com/vacuum-drying-equipment-10297506

vacuum drying equipment is widely used in pharmaceutical, chemical, foodstuff and electronic industries.

Principle of work
It is well known that vacuum drying is to put raw material into the environment of vacuum for heating and drying. If use vacuum pump to draw air and humidity out, the dry speed will be faster.

Note: if use condenser, the solvent in raw material can be recovered. If use SK series water ring vacuum pump or ZSWJ series hydraulic jet vacuum pump sets, condenser can not be used and the cost of investment could be saved

Features
Under the condition of vacuum, the boiling point of raw material will decrease and make the pushing force become greater. Therefore for a certain amount of heat radiation, the conducting area of evaporator can be saved;
The heat source for operation of evaporation may be Iow pressure steam or surplus heat steam;
The heat loss of evaporator is little;
Before drying, the treatment of disinfection can be carried out. During the period of drying, there is no impurity material mixed in. It is in conformity with the requirement of GMP;
It belongs to static drier. So the shape of raw material to be dried will not be destroyed.

Technical parameters

Name\specification	YZG-600 Φ×L	YZG-800 Φ×L	YZG-1000 Φ×L	YZG-1400 Φ×L	FZG-15 L×W×H
inside size of chamber (mm)	600×976	800×1274	1000×1527	1400×2054	1500×1400×1200
size of chamber (mm)	1153×810×1020	1700×1040×1335	1693×1190×1500	2386×1657×1920	1513×1924×2060
layers of baking shelf	4	4	6	8	8
layer of baking shelf (mm)	81	82	102	102	122
size of baking shelf (mm)	310×600×45	460×600×45	460×640×45	460×640×45	460×640×45
number of baking disk	4	8	12	32	32
permitted pressure inside the pipe of baking shell(Mpa)	≤0.784(8kgf/cm2)	≤0.784	≤0.784	≤0.784	≤0.784
temperature inside chamber()	≤150	≤150	≤150	≤150	≤150
vacuum in idle inside chamber	≤30
when vacuum is 30 torr and the heating temperature is 1100C,vaporized rate of water(kg/m2.h)	7.2
if use condensator,type and power of vacuum pump(kw)	2X-15A 2kW	2X-30A 3kW	W3 5.5kW	W3 7.5kW	2X-70A 7.5kW
if not use condensator,type and power of vacuum pump(kw)	SK-0.8 2.2kW	SK-3 5.5kW	SK-3 5.5kW	SK-3 7.5kW	SK-3 7.5kW
weight of drying chamber(kg)	250	600	800	1000	2100