Home  >  Farm Machinery  >  Animal Husbandry Equipment  >  Other Animal Husbandry Equipment

Making nature environment, physical pest control, safety to human and livestocks., Reduce insecticide/pesticide use over 70-90%. - details see: https://www.machineto.com/uv-solar-radial-insect-killer-lamp-moth-trap-pest-control-light-10175826

Description of goods:

1.Lamp:

Light power:15W flourescent lamp,life span:5000 hours
Voltage:DC12V
Control area:1-4 hm2(square hectometers) light source: ultraviolet lamp, peak wave length 365nm
Working temperature: -30C--+60C
waterproof,anti-corrosion,
keeping2-3 rainy days.

2.Solar panel:

1 pc 40W ,packaged by box,
life span 25 years

3.Gel battery:

1 pc 12V/24AH ,packaged in box,
charge time: 8 hours,
Life span: 5 years

4.Solar controller:

1 pc 12v/5A ,packaged in box
over charge and over load protection
Automatic time control,light control,rain control,
lighting time preset or by hand set

5. Electrical box:

1 pc, iron material, holding battery and controller inside,support the solar panel,pakaged by box

6. Light pole:

1 pc,steel or stainless steel material, 1-3m. life span 15 years
Pole base 1:triangle type,digging a deep hole on ground,cover up by soil and stone.
Pole base 2: flange base, fixing up by hex bolts on a cement basement to prevent from strong wind
Pole cracket: to hold the whole lamp by fixing up the top and bottom
Packing: wrapped by PVC/PE

7. Accessories: Bolts,screws,washer,brush,bag,manual, etc

A.Brief Introduction to Frequoscillation Pest Killing Lamp

Thank you to purchase this product,In order to ensure the proper use of pest killing lamp, Please carefully read the instructions.

According to the biological nature of pest on light, wave, color attraction, design the special light source, trapping the pests fly to the light bulb, which be killed by high-voltage shocking networks outside around.

B.Scope of Application

It may be widely used to agriculture, forestry,vegetables, storage, tea leaves, tobacco, gardens, sheds, grape gardens, brewery, urban greening, aquiculture, and it may kill:
(1) Vegetable pests: Spodoptera exigua hubner, spodoptera litura F., plutella xylostella, oebia undalis, potato moth, snout moths larva, changa.
(2) Paddy pests: rice borers, leaf hopper, rice stem borer, yellow rice borer, rice fulgorid, rice leaf roller.
(3) Cotton pests: cotton bollworm, ranville worm, pink worm, cotton geometrid.
(4) Fruit tree pests: Grapholihta molesta, geoetrid moth, fruit-sucking moths, yellow peach grub.
(5) Forest Pests: Hyphantria cunea tiger-moth, satin moth, pine moth, pine sphinx moth, aphrodisium, anoplophora glabripennis, phigalia djakonvi moltrecht, leaf roller, apocheima cinerariuserschoff, poplar moth, green leaf hopper.
(6) Wheat pests: gelechiid moth, army worm.
(7) Minor cereals pests:jowar borer, maize borner, soybean pod borer, greenish brown hawk moth, foxtail millet borer, apple-orange butterfly.
(8) Underground pests: cutworms, heliothis assulta guenee, night flying beetle, propylaea japonica, coccinella septempunctala.
(9) Meadow pests: grasshopper, meadow moth, leaf beetle.
(10) Storage pests: large gnawing beetle, little gnawing beetle, gelechiid moth, dark mealworm, S.Paniceum, rice moth, harmonia axyridis, and etc. there are 1326 pests.

C. Product Structure

D. How to use

(A) AC TYPE

1. Hanging mode

Diiferent hanging mode based on topographic and plant,place the lamp over the plant in general.To stop the shake in wind, fix lampto the pole.

2. Cable connection

Connect pest killing lamp by cable with state grid(cut off the power supply to make sure safety connecting).Pay attention to poor connect,wrapping joint point by insulating tape to avoid rish.

(B)DC TYPE–solar pest killing lamp

1. Installation mode

(1)Solar module installation

To avoid short circuit , make sure the positive and negative of solar module to be seperated before connecting to controller.

Solar module and bracket should be firmly fixed.

The direction of solar module should be south or 10 degree west with the compass.

(2)Battery installation

Place the battery to box gentlely;

To avoid damage to battery, don’t making short circuit for batteryoutput line;

(3)Pole installation

Dig up foundation pit with size 600x600x600MM at the central of control area.

Put the cage into hole,casting C25 concrete 350mm high.

Make sure the height of cage over groud 200MM andperpendicular of the pole, then fullfil the hole.

Fix up solar module to bracket and place the battery to box in advance ,insert the pole to bracket, fixing up by bolts, install pest killing lamp,and connected by cable.

2. Maintenance

(1)Storage:

Turn off the ON/OFF switch,full charge the battery by 2-3 sunny days, clean up whole body and shock net.

(2)Install the solar module at right palce to make sure direct sunshine on solar panle and no shelter.

(3)keep clean on solar panel to increase photoelectric conversion efficiency.Clean up solar panel each half year.Don’t washing it by water from top to bottom.

E. Attention

1. Clean up insect collecting bag per 2-3 days to one week depends on killing quantities.

2. Keep clean for lamp and shock net,clean away the pest body from shock net and lamp by brush per each 1-3 days depends on killing quantities.

3. Turn of the ON/OFF switch beforeclean upthe lamp.

4. Lamp bulb is special trapping source which spead special lgiht, can’t be used to indoor lighting and can’t be instead of normal lighting bulb.

F. Security warning

1.Don’t touch high voltage shock net when it is on working.

2. When changing lamp, turn off the on/off switch, discharging electricity by touching shock net with metal stick which has insulating handle.

3.To repair lamp please cut off the power.

4. Don’t knock down the lamp case and shoch net by heavy weight.

5. Don’t touch the positive and negative of battery by electric conductor,itmay cause burn,fire,and explosion.

6. Don’t making reverse connection when connecting battery and circuit,itmay cause damage to electronic parts.

7.Disassembly only by the professionals.

G.Common fault:

NO.	Fault	Reason	Treatment
1	High voltage,lamp does not light up	Lamp damage	Change lamp tube
2	No high voltage,lamp does not light up	No input power	Checkpower jack,cable and voltage
3	Lamp light up, no voltage or low voltagte	No voltage input	Clean the dirt or water on and between electrode, or change transformer
4	lamp light up, small quantity pest be killed	More pest dead body on shock net. Lamp beyond the service life	Clean dead body on shock net. Change lamp tube.

H.Warranty:

One year warranty.

I.Exemption clause:

1. Damage caused by strIking,over loading, chemical corrosing.

2. Damage caused byforce majeure.

3. The appearance of injury, color changing after sales.

4. Damage caused by improper operation which incompatible with statement on Instruction Manual.