Home  >  Chemical Process Machinery  >  Chemical Machinery & Equipment  >  Chemical Machine Parts

UV energy account meter, 1.Control UV curing quality online., 2.cost:620USD per one, 3.replace America and Janpan with low cost - details see: https://www.machineto.com/uv-energy-account-meter-10282086

UV energy account meter

UV-Integrator 1401

Introduction:

The Integrator1401 is a high quality UV measuring instrument.

The Integrator is used to measure UV energy of different light sources, especially on printing machines. It is ideal to ensure quality control of printing and drying processes.

It is measuring an integral in the spectral range from 250-410 nm.

By addition of the incidence of the light quantities during the UV exposure cycle, relative values are calculated.

Because of uneven radiation distribution of the UV light source and different type of construction of the measuring devices by different manufacturers, different readings

may appear under the same measurement conditions.

Instruction for use:

1.Switch on the UV-Integrator. display will show 0.

2.Place the UV-Integrator with the front facing the conveyor belt. sensor is on the back of the UV-Integrator.

The back plate of the UV-Integrator serves as the heat shield.

3.After the UV-Integrator has passed through the conveyor, take the UV-integrator from the conveyor belt in order to read the measuring result. measuring results are shown as: mJ/cm2.

4.Prior to a new measuring sequence, it is necessary to switch off and then on again. It will reset display 0 automaticallly.Continue as described in Step 2.

Attention:

1.Please avoid shaking the UV-Integrator

2.UV-light is hazardous to your health. Avoid direct UV-light to your eyes and to your body.

Technical Data:

Spectral range: UV 250-410 nm

Measuring range: 0 to 5,000mW/cm2

Display range: 0 to 999,999mJ/cm2

Power source: Long life 3.6 V lithium Battery

Power consumption: 100 μA

Battery service life: one year

Dimensions: 140mm φ,13mm height

Weight: Approx.450 gr.

Temperature range: 0 to 45°Celcius

While on the conveyor belt, Integrator 1401 can withstand max. 110°Celcius no more than 10 seconds.

Calibration:

In order to keep its full function and precision it is recommended to have re-calibration done once per year. Re-calibration