Used Oil Heater HBH-05 for Plant

1.hanging type, 2.Various fuels are applicable, 3.Remote control,Automatic ignition, 4.Dual-safe systerm, 5.3-5 days delivery - details see: https://www.machineto.com/used-oil-heater-hbh-05-for-plant-10245200

Condition:New	Type:waste oil heater	Power Source:Diesel	Place of Origin:Shandong China (Mainland)
Brand Name:SKY	Model Number:HBH-05	Dimension(LWH):1200500500	Weight:140
Voltage:110V/220V	Power(W):24-59	Certification:CE	Warranty:1 YEAR
Heat Range:20,400-51,000(kcal/h)	Output Heat Power:24-59	Burner Model:B-05	Exhausting Air(m3/h):6000

contact supplier for Used Oil Heater HBH-05 for Plant

Model No.: HBH-05 waste oil Heater

Descriptions:

1. Oil consumption: 2 - 5 (KG/Hour)

2. Output heat: 20400-51000(KCal/h) or 24-59 (KW)

3. Motor direct-drive Fan, 140W/220V/1Phase each, totally 280W;

4. Exhausting air: 5400M3/H totally;

5. Separate oil tank 100L enclosed;

6. Heater dimensions: 1200mmx750mmx600mm

Features:

1. Various fuels are applicable, e.g. used engine oil, waste vegetable oil, used crankcase oils, used Glycerin, used Hydraulic oil, used synthetic oils, waste machine shop cutting oil, waste mineral spirits solvent, waste grades #1, #3, #4 heating oils, waste mixed heavy oil etc., as well as regular oils, such as diesel, etc.

2. Indoor hanging type, automatic running, low noise and powerful blowing;

3. Temperature-set system available.

4. Stainless steel heating-exchanger.

5. Computer controlling, remote controller enables worker to start and stop the machine from 20 meters away.

6. Exhausting air complies with the requirements of EURO III;

7. Two applications available. The machine can be put on the window outside or inside hanging from the ceiling;

8. Heating adjustable by adjusting burner's output.

B-05 waste oil burner
Features:
1. Various fuels are applicable, e.g. waste engine oil, diesel, waste vegetable oil, etc.
2. With 100L oil tank, to hold the burner machine during shipping from damage and contains fuel as much as possible when using.
3. There is a heating system at the bottom of the 100L oil tank to pre-heat fuel before pumping, esp. considerate for using in cold area.
4. Flame adjustable freely by air-inlet controlling.
5. 220V/50Hz & 110V/60Hz both available
6. Package weight: 42KGS
7.Specifications
Oil consumption: 2 - 5 (KG/Hour)
Output heat power: 24-59(KW)
Output heat: 20,400-52,000(KCal/h)/80,000Btu/H-200,000Btu/H
Distance from fire gun to flange: 173mm
Distance of screw bore in the flange: 160x160(mm)
Nozzle diameter: 1 x 1.0 (mm)
Compressed Air Pressure: 0.05-0.1MPa