Home  >  Used Machinery  >  Used Construction Machinery  >  Used Motor Graders

Used motor grader CAT 160H, 1.year: 2009, 2.good working condition, 3.reasonable price, 4.mobile:+86-15021977028(Alice) - details see: https://www.machineto.com/used-cat160h-used-grader-cat-160h-motor-graders-secondhand-10363759

Used motor grader Caterpillar CAT 160H

Selected Dimensions

Dimensions
A. Overall Length	33.1 ft in	10097 mm
B. Width Over Tires	8.1 ft in	2460 mm
C. Height to Top of Cab	11 ft in	3356 mm
D. Wheelbase	20.2 ft in	6169 mm
G. Tandem Axle Wheelbase	5 ft in	1523 mm

Specification

Engine
Make	Caterpillar
Model	3176C ATAAC
Net Power Gear 1-2	180 hp	134.2 kw
Net Power Gear 3-4	200 hp	149.1 kw
Power Measured @	2000 rpm
Net Power Gear 5-6	200 hp	149.1 kw
Torque Measured @	1000 rpm
Net Power Gears 7-8	200 hp	149.1 kw
Number of Cylinders	6
Max Power	200 hp	149.1 kw
Net Torque Gears 7-8	840.8 lb ft	1140 Nm
Displacement	628.5 cu in	10.3 L
Operational
Std Operation Weight - Front Axle	10117 lb	4589 kg
Std Operation Weight - Rear Axle	25774.2 lb	11691 kg
Std Operation Weight - Total	35891.3 lb	16280 kg
Max Operation Weight - Front Axle	18322.6 lb	8311 kg
Max Operation Weight - Rear Axle	33003.2 lb	14970 kg
Max Operation Weight - Total	51325.8 lb	23281 kg
Fuel Capacity	104.9 gal	397 L
Cooling System Fluid Capacity	10 gal	38 L
Hydrauilc System Fluid Capacity	21.1 gal	80 L
Rear Diff/Final Drive Fluid Capacity	12.4 gal	47 L
Circle Gearbox Fluid Capacity	1.8 gal	7 L
Tandem Case Fluid Capacity (each)	16.9 gal	64 L
Tire Size	10-24 12PR
Operating Voltage	24 V
Alternator Supplied Amperage	35 amps
Transmission
Number of Gears - Forward	8
Number of Gears - Reverse	6
Max Speed - Forward	27.1 mph	43.6 km/h
Max Speed - Reverse	21.4 mph	34.4 km/h
Steering
Articulation L/R	20 degrees
Turning Radius	24.3 ft in	7.4 m
Front Axle
Wheel Lean	18 degrees
Oscillation - Total	32 degrees
Hydraulic System
Pump Type	Axial Piston
Pump Flow	68.7 gal/min	260 L/min
Relief Valve Pressure	3502.7 psi	24150 kPa
Moldboard
Moldboard Width	14 ft in	4267 mm
Moldboard Height	27 in	686 mm
Moldboard Thickness	0.98 in	25 mm
Max Depth of Cut	30.3 in	770 mm
Side Shift Left	33.5 in	851 mm
Side Shift Right	37.1 in	943 mm
Blade Pull at Max Weight	44249 lb	20071 kg
Blade Down Pressure	30441.4 lb	13808 kg
Circle
Shift Left	33.4 in	848 mm
Shift Right	34.7 in	881 mm
Max Reach Outside Tires - Left	87.5 in	2223 mm
Max Reach Outside Tires - Right	89 in	2261 mm
Max Lift Above Ground	17.8 in	452 mm
Blade Tip Angle - Front	40 degrees
Blade Tip Angle - Rear	5 degrees
Dimensions
Height to Top of Cab	11 ft in	3356 mm
Overall Length	33.1 ft in	10097 mm
Width Over Tires	8.1 ft in	2460 mm
Wheelbase	20.2 ft in	6169 mm
Tandem Axle Wheelbase	5 ft in	1523 mm

We also supply the following machines:

Truck Crane

KATO:NK200E, NK250E, NK300E, NK400E, NK500E, NK800E, NK1000, NK1200, NK1200E

TADANO:TG250, TL250, TL250E, TL300E, TG300E, TG350E, TG450E, GT550E, TG550E, TG650E, GT650E, TG1000E, TG1200E, TG1200M, TG1600M

DEMAG:AC265 100ton

GROVE:80ton, 100ton, 115ton, 120ton, 270ton, 300ton, 320ton

Rough terrain Crane

KATO:KR25H, KR45H, KA300, SS500.KR250E, KR450

TADANO:KR250E,KR350E, TR250M, TR300M, AZ300D, AR350, TR450E, TR500M

Crawler Crane

HITACHI:KH700, KH120T, KH125, KH150, KH180

KOBELCO:50T, 100T, 120T, 300T

SUMITOMO:50T, 100T, 200T

Excavator

Hitachi:EX100, EX100WD, EX120, EX200, EX200LC, EX220, EX300, EX350, EX450, ZX70, ZX120, ZX150, ZX220, ZX270, ZX450

Caterpillar:200, 235, 305, 307, 312, 320, 330, 324, 325, 345 (From Model B to Model D)

Komatsu:PC50, PC60, PC100, PC120, PC130, PC200, PC210, PC220, PC300, PC350, PC400, PC450

Kobelco:SK100, SK120, SK200, SK350

Daewoo:DH55, 60, 130, 150, 220, 225, 300

Hyundai:130w, 150w, 200, 210, 220, 225, 290, 305

Volvo:EC210, 220, 300

Loader

Caterpillar:916, 924, 928, 936, 938, 950, 966, 980, 988 (From Model C to Model H)

Komatsu:WA100, 230, 250, 300, 320, 350, 360, 380, 400, 430, 470

Kawasaki:70, 70B, 80Z, 85Z, 90, 90Z, 95Z

Backhoe Loader:JCB3CX, JCB4CX, CAT436

Bulldozer

Caterpillar:D6D, D6H, D6R, D6G, D7H, D7G, D7R, D8K, D8R, D8N, D8L, D9N, D9R, D10N

Komatsu:D50P, D60P, D65, D85, D155

Motor Grader

Caterpillar:12G, 14G, 120G, 140G, 16G, 140H, 160H, 140K

Komatsu:GD511A, 605A, 623

Road roller

DYNAPAC:CA25, CA30, CA511 Serials

BOMAG:213, 217, 219, 225 Serials

Forklift

Komatsu, Toyota, TCM, Heli, Nissan, Mitsubish(From 2.5 ton to 30 ton)

If you need more information, please do not hesitate to contact us.

Welcome to visit our factory to choose and check your preferred machine.

Mobile number: 0086-15021977028

Skype: alice080324