Uranium dioxide spray dryer

Uranium dioxide spray dryer, 1.Uranium dioxide spray drier, 2.Uranium dioxide spray drying machine, 3.ISO9000 - details see: https://www.machineto.com/uranium-dioxide-spray-dryer-10295868

Type:Spray Drying Equipment,Dring machine	Place of Origin:JIA,Jiangsu China(Mainland) China (Mainland)	Brand Name:SF	Model Number:LPG
Application:Drier	Material:Stainless steel	Standard:GMP	Certificate:ISO9000
Category:Dring machine	Advantage:High output

contact supplier for Uranium dioxide spray dryer

Applications:
1.Spray drying is a wide applied process in liquid process shaping and drying industry.

2.Particularly suitable for producing powder, granule or block solid product from solution, emulsion, suspending liquid and pumped paste liquid.

Features:

1.In hot air stream, 95% to 98% of moisture can be evaporated immediately.

2.Quick drying speed:the surface area of material liquid through atomizing is increased greatly.

3. Product has good uniformity, fluidity, solubility, high pure, and quality.

4.For liquid containing0~60% of damp(special may be 90%), it can be dried to powder through drying one time.

5.After dried, not necessary to crush, sieve therefore reducing productive procedure .

6.For the size, bulk density and moisture of product can be adjusted within certain scope through exchanging operation condition.

7.large flexibility of operation

8.no high requirement for factory buildings

Technical Data:

specification		LPG
specification		5	25	50	100	150	200-3000
Tep of inlet air		≤ 350°C
Tep of outlet air		80-90
(kg/h) Evaporated capacity		5	25	50	100	150	200-3000
Transmitted		Compressed air	By machine
(rpm)Rotating speed		25000	22000	21500	18000	18000	15000
(mm) ia. of atomizing disk		50	120	120	120	150	180-340
Heat source		Electricity	Electricity	+ Electricity+ steam, oil fuel, gas	+ Electricity+ steam	+ Electricity+ steam, oil fuel, gas	Solved by customer
(kw) Powder of electric heater		9	45	60	81	99
(%) Yield of dry powder (%)		≥95	≥95	≥95	≥95	≥95	≥95
Installation Size for reference	A(mm)	1000	1290	1730	2500	2800	Decided in accordance with actual condition
	B(mm)	2100	3410	4245	5300	6000
	C(mm)	2300	4260	4645	6000	6700
	φ D(mm)	1060	1800	2133	2560	2860
	E1(mm)	1050	1200	1640	2100	2180
	E2(mm)	1050	1200	1640	2100	2180
	F(mm)	750	1000	1250	1750	1970
	G(mm)	530	1700	1750	1930	2080
	H(mm)	530	1300	1800	2600	3050
	I(mm)	530	1550	1600	1780	1960