Home  >  Metal Processing Machinery  >  Machine Tools Accessory  >  Machine Tool Spindle

multi angle universal attachment adds near sphering contouring capability to your machine spindle. - details see: https://www.machineto.com/universal-milling-drilling-head-10154719

Universal milling attachment is an import substitute, multi-utility attachment with spherical contouring and infinite variable orientation capabilities at any desired plane.

CONSTRUCTION, FEATURES & SPECS:

• Spherical contouring capability tot (a) to tilt±360° around the machine spindle axis (b) to tilt ±360° on its own spindle axis& & (c) to oscillate from front to back. In other words, the spindle of the universal head can be positioned at any desired angle – at circular planes or at oscillating plane or at a combination plane of both circular and oscillating positions.
• 2 pairs of spiral bevel gears and 3rotating shafts provide 360° variable, universal orientation facilities.
• Consists of 3 modules – flange, central module and vertical module.
• The flange module and central module have circular T slots, so that the spindle module can tilt on the central module and the central module can tilt on the flange module.
• While the flange and the central modules are with horizontal axes, the angle between the central and module and vertical spindle module has a unique 45° interface.
• The drive system consists of 3 shafts (including the spindle) with well-designed, rigid bearing supports and with 2 pairs of bevel gears.
• Pair of angular contact bearings in the front and a matched pair of angular contact bearings in the rear to rigidly support the ISO-50 spindle.
• Gears, shafts, spindles are made of case hardening steel, case hardened and ground.
• Adequately dimensioned, ground splines, integral with shafts & spindle for locating & rigidly supporting the spiral bevel gears.
• Spindle bearings are lubricated for life, using the molybdenum sulfide grease. For the gears, LS 415EP-00 grease is to be used.
• Body, consisting of 3 modules, is made of stress-relieved cast iron and conforms to Grade-25.
• Graduated collars with least count of 1°least count on the spindle and central module.
• Drive: through tennon
• Custom built flanges to suit to individual machines
• The ratio between input and output is 1:1.
• Conventional draw bar for arbor holding. Push button actuated hydraulic clamping and de-clamping of the cutter holding draw bar offered optionally.
• Recommended max. spindle speeds with standard taper roller bearing: 700 RPM
• Recommended max. spindle speeds with optional matched pair angular contact bearings: 1,000 RPM

SPECIFICATIONS	UMH-L	UMH-M	UMH-E 40 x 40	UMH-E 50 x 50
Output spindle taper	IS0-50	ISO-50	ISO-40	ISO-50
Spiral gear module	7	6	4.5	6
Cutter recommended (max)	Ø315	Ø250	Ø125	Ø315
Suitable for spindle power	50 HP & more	30 HP	5 HP	50 HP & more