Home  >  Metal Processing Machinery  >  Machine Tool Equipment  >  Welding Equipment  >  Electric Soldering Irons

ULUO5205 temperature-controlled soldering station, 1.CE RoHS approved, 2.double temperature diaplay, 3.150W big power - details see: https://www.machineto.com/uluo5205-150w-temperature-controlled-soldering-station-10136220

ULUO205H 150W temperature-controlled soldering station:

1.High frequency current heating,fast heating and rapid temperature recovery,

suitable for lead free soldering.
2.Mico computer control,set temperature only by pressing keys.
3.More functions available, such as auto sleeping, auto shut-off.
4.Password locks function.
5.ESD safe by design,various types of tips available.

6.150W big power design, ¢8mm soldering tips also could use!

Model:	ULUO5205
Power	150W
Output Voltage	AC 36V,400KHZ
Temperature range	50°C-500°C
Tip to Ground Resistance	‹2Ω
Tip to Ground Potential	‹2mV
Max Work Environmental Temperature	40°C
Temperature Stability(no load)	±2°C
Outside material	Aluminium
Outside dimension	(L)200*(W)130*(H)100mm
Weight(no power line)	3.9kg
Outside Material	ESD Design,Aluminium material,Stable useful.
Application of occasions	Particularly suitable for the ground terminal, large solder point, and solar photovoltaic modules, such as welding sites that require high heat capacity.
Note:	1.All our soldering station can make as your requirements(110V/220V) 2.Temperature test as the UL191 soldering iron tester.

Tip Replacement and Dressing:

Tip replacement or cleaning should be done only when the iron is at room temperature. The tip can be changed or replaced simply by unscrewing the knurled nut from the barrel assembly. The station must be switched off and allowed to cool before and during this operation, as damage may result if the system is left on without the tip installed. After removing the tip, blow out any oxide dust that may have formed in the tip retaining area of the barrel. Be careful to avoid getting debris in your eyes. Replace the tip and screw the retaining knurled nut onto the barrel assembly; tighten only finger-tight. Pliers should only be used to tighten the nut if it becomes loose when the iron is hot to, avoid burning your fingers. Care should be taken not to over tighten as this can damage the element.

General Cleaning:

The outer case of the iron or station may be cleaned with a damp cloth using a small amount of liquid detergent. Never submerse the unit in liquid or allow any liquid to enter the case of the station. Never use solvent to clean the case.

Maintenance:

The iron must be placed in its stand when not in use. If the supply cord becomes damaged, it must be replaced by a qualified service technician.

The Repaceable tips of ULUO5205 temperature controlled soldering station:

The max temperature is 500 C degree of ULUO5205 temperature controoled soldering station: