Home  >  Mining & Metallurgy Machinery  >  Mining Machinery  >  Vibrating Screen

1. 500 mesh sieve hole, 2. Rapidly replace the screen, 3. Less or no net-cleaning time - details see: https://www.machineto.com/ultrasonic-vibrating-screen-for-sieving-super-fine-powders-10321916

Working principle

Ultrasonic Vibrating Screen are made up of ultrasonic controller, converter and resonance loop.

Electric oscillation generated by the ultrasonic controller is converted by the converter into high frequency sinusoidal longitudinal oscillatory wave,

which transfers to the resonance loop and create resonance and then goes uniformly onto the screen surface.

Ultrasonic vibration is added to the low frequency rotating vibration of materials on the screen mesh, preventing mesh clog and enhancing the screen’s productivity and quality.

Main components

High frequency connecting line: Cable connection is used to connect ultrasonic generator and ultrasonic transducer.

Connector interface: Connector assembly with Two cores.

Conversion device: high-performance ultrasonic transducer.

Ultrasonic rack: consist of outer rack and resonance ring.

Information needed before quote

1. Material to be processed?

2. Granule size of the materials?(or mesh size)

3. Moisture content if any?

4. Granule size proportion if possible to get?

5. Capacity (ton or kg per hour )

6. Local power supply(voltage and Electric phase )

Technical parameter

Type		XZC49-600	XZC49-800	XZC49-1000	XZC49-1200
Efficient diameter screen (mm)		Φ540	Φ730	Φ900	Φ1000
Efficient area screen (Square meter)		0.2289	0.4183	0.6359	0.9499
Sieve mesh/hole size		100-635 mesh
Layer		1- 5 layers
Powe (Kw)	Vibration motor	0.25	0.55	0.75	1.1
Power (Kw)	Common motor	0.75	1.1	1.5	1.5

For your selection

• Each type can be 1-5 layers, and the mesh is available for 10 mesh -635 mesh (24μm--1680μm). .
• Material: SUS 304 / Q235A / 316L
• Voltage: 380V /400V, Frequency:50 / 60 HZ
• Sieve diameter: 400mm, 600mm, 800mm,1000mm,1200mm,1500mm,1800mm, 2000mm