Home  >  Construction Machinery  >  Building Material Machinery  >  Glass Production Machinery  >  Glass Product Making Machinery

Two-component Extruder, 1.Material drum:200L, Curing agent drum:20L, 3.Mix ratio 6:1~14:1 - details see: https://www.machineto.com/two-component-extruder-10085460

Two-component Extruder

Introduction:

Pump of A and B component all adopt pneumatic system driver , reversing is nimble

and reliable ,the efficiency is much more improved.

Optimize the pipeline, increase the main motor power, to make the discharging more

rapid and fluent.

The curing agent system, is fully enclosed system, to eliminate the air enter into, avoid

the contact of the air and curing agent (to the silicone glue curing agent), improve the

mixing effect. At the same time, this system passed four filtering, ensure the curing

agent clean and the stability of system, extend the life of pump body.

The high pressure valve port of base material pump and the curing agent pump and the

proportioning pump all adopt zero leak special alloy grinding manufacturing, there is a

simple and easy adjustable ratio institutions in the proportioning pump, it can ensure

the almost harsh matching requirements of the two component glue to meet the

proportion of glass curtain wall and insulating glass.

Technical Parameter

Mixing ratio 6:1~14:1

Material drum 200L

Curing agent drum 20L

Max. air consumption 0.8 cbm/min

Max. dispensing Pressure 30Mpa

Output 4~10L/min

Air supply pressure 0.8~1.0Mpa

Overall dimension 1420×900×2500mm