Home  >  Construction Machinery  >  Engineering & Construction Machinery  >  Road Machinery  >  Road Marking Machines

New designed microcomputer control., TW-V is made up of a hydraulic system, a pneumatic system,a mechanical system - details see: https://www.machineto.com/tw-v-self-propelled-thermoplastic-vibrating-road-line-marking-machine-10120766

TW-V Track line marking machine, made up of a hydraulic system, a pneumatic system, a mechanical system, and a microcomputer system, can complete the construction of baseline and vibrating line at one time and mark lines with different bulge length and bulge spacing by controlling the microcomputer.

Features ofTW-V Track line marking machine

lThe hydraulic step less transmission device can make the machine walk automatically, which is faster and more effective.

lFor traditional self–propelled vibrating marking machines, the liquefied petroleum gas tank is too taller than operator that their sight is blocked. Our new model overcame this disadvantage by rearranging thehydraulic system, pneumatic system, mechanical system and the microcomputer system, which makes the machine structure more reasonable and user-friendly. The most important thing is that the total weight of the machine is 50KG lighter.

lThe new designed vibrating marking hopper adopted several kinds of new materials and is more durable than ordinary hopper. The new arrangement of the pneumatic system and mechanical system on the vibrating hopper contribute to fewer breakdowns of the air cylinder and electric equipment by keeping the air cylinder far away from heat source.

lLines of different bulge length and bulge spacing can be marked by adjusting the control panel of the microcomputer.

lThehydraulic system, pneumatic system and microcomputer system we adopted are all well-known international brands, which make our vibrating marking machine function better.

The technial parameters ofTW-V Track line marking machine

Outer dimensions(L*W*H)	1400 X1100 X1100mm
Total weight of machine	220kg
Capacity of glass beads box	10kg
Weight of paints to be melted:	115kg
Diesel engine power	HONDA gasoline engine of 5HP
Working pressure	0.5Mpa
Walking installment:	Hydraulic pressure step less speed regulation
Walking speed	0-10km/h
Lineation speed	>400m/h(depending on coat, baseline thickness and bulge thickness)
Gradient	30%(about 16.5º)
Bulge height	1-10(depending on the quality of paint)
Bulge spacing:	1-999mm within error of ±5mm
Bulge length	1-999mm within error of ±5mm
Bulge width	Standard models Hopper of 150mm. made up of three lines with each 25mm Hopper of 200mm.made up of four lines with each 25mm Hopper of 300mm. made up of four lines with each 25mm
Baseline thickness	1-5mm
Glass dead dispense method	Gear driven, automatically clutch, fine adjustment dispense amount
Heating method	15kg liquefied petroleum gas