Home  >  Mining & Metallurgy Machinery  >  Mining Machinery  >  Mine Drilling Rig

Proven design, High usable length, Based on a hydraulic carrier, High strength and stability, High versatility - details see: https://www.machineto.com/truck-mounted-water-well-drilling-rig-bzc400bca-400meter-10313330

BZC-400BCA truck mounted water well drilling rig

1.BZC-400BCA truck mounted drilling rig is a kind of truck mounted and rotary table drilling rig.

2.The truck chassis adopts the 8X4 special crane chassis of brand CHAN'AN TRUCK and the main drive system, the transfer case, gearbox, double-winch unit, mud pump, turntable, drilling tower, feed mechanism are set up on the chassis.

3.This rig is a rotary drilling rig with directional circulation. It is equipped with BW850/2A mud pump which adopts the slurry as the washing fluid and can drill on clay, sand and rock if it is equipped with suitable drilling bit.

4.The main drive of rig is mechanical and the four landing legs and drilling tower are hydraulic controlled. Transfer case and mud pump clutch system are air operated.

5.According to client’s requirement, the rig can carry out down-the-hole hammer drilling with USA Sullair, Japan PDSKIOOS, Sweden Atlas, China Kaishan, Hongwuhuang; can carry out air lifting reverse circulation drilling with air-water tap, double-wall drilling pipe, gas-water separator; can carry out Hydraulic DTH hammer drilling rock breaking with 850/2A mud pump; can carry out core-drilling with other special drilling tools;

Technical parameter
			80	400
Drilling depth(M)			1000	500
80			21.2;36;63.2;100.6;155;20.2(reverse)
300			18;10.6;6;3.8;2.5;18.9(reverse)
			30
Drilling diameter(mm)			180
1500			180
500			11500
			25
Speed of turntable(r/min) 21.2;36;63.2;100.6;155;20.2(reverse)	Kelly (mm)		108×108×7500
	Assistant pipe (mm)		89×10×6000
Torque of turntable(KN.m) 18;10.6;6;3.8;2.5;18.9(reverse)	Model		CBQL-F550/F532-CFHL
	Pump delivery (ml/r)		50/32
	Rated speed (r/min)		2000
	Rated pressure(MPa)		20
Single rope lifting capacity of windlass(KN) 30 The lifting capacity of hook(KN) 180 Bearing capacity of mast (KN) 180 The height of mast (mm) 11500	Diameter of cylinder (mm)		150
	Stroke of piston (mm)		180
	Theory of flow (L / min)		600 850
	Rated pressure (Mpa)		3 2
	Pounding times (min-1)		58 82
	Diameter of suction tube (mm)		127
	Diameter of drain pipe (mm)		64
	Input speed (r / min)		470
	Input power (kw)		40
	Overall dimensions (mm)		2000*1030*1400
	Weight (t)		1.5
Bearing capacity (t) 25 Pipe Kelly (mm)	Model		CZ5210
	Drive form		6×4
	Engine	Model	CA6DF3-18E3
		Rated power(KW)	132
		Speed (r/min)	2300
	Size (L*W*H)(mm)		10230×2490×2870