Home  >  Construction Machinery  >  Engineering & Construction Machinery  >  Concrete Machinery  >  Concrete Spreader

1.wireless remote control., 2.manufacturer of hoisting and concrete machinery with 10-year experence., 3.with BV certificate. - details see: https://www.machineto.com/trailer-stationary-separate-concrete-pump-placing-boom-10093985

Hydraulic concrete placing boom could be working together with concrete pump for concrete pumping and placing in construction projects.

Advantages are as follows:

1)The placing boom has a R-shaped boom assembly with three foldable sections, which can swing through 360 degrees while luffing, folding, unfolding, thus allowing it to place concrete to form walls, pipes, columns, piles and other vertical structures without confined placement areas.

2)The boom assembly’s luffing, folding/unfolding and swinging are carried out hydraulically with buttons. The hydraulic and electrical system feature overload protectors, flow controls, alarms, phase sequence protectors and so on, which ensures the placing boom to have reliable performance, easy and smooth operation, and high safety.

3)Featuring compact structure and lightweight, the placing boom can be completely lifted and transferred to any suitable places for concrete placement, such as floors, platforms, simply-structured racks or even trailers. It does not need to be fixed while working. In addition, it can be lifted off the placement sites when it is not needed, which leads to no disturbance to other jobs and easy maintenance.

Main technical parameters of concrete placing boom HG32

concrete placing boom
Model		HG32
Concrete conveying tube specification(Outer Dia.×Tube THK)		Φ133×4mm
Tube specification(Inner Dia.×L)		5″×3000mm
Distrbuting radius		31.7m
Unattached height(to arm hinge point)		22.9m
Three-jib hydraulic folding type	1st section	14.5m
	2nd section	9.2m
	3rd section	8m
Boom working angle	1st section	—4.2°+82.5°
	2nd section	0°-180°
	3rd section	0°-180°
Rotating scope		360°
Motor power		15kw
Hydraulic system pressure		28Mpa
Hydraulic oil spec		ESSO NUTO H46
Min climbing frame interval	Climbing	3.0-4.2m
	Placing concrete
	Resting	6.0-8.4m
Operation Mode		1.cable remote control
		2.radio remote control
Power		380V/50HZ

Selling points:

1.The hydraulic system of HG series concrete placing boom can realize 360° slewing; the balance valve and solenoid directional control valve are relatively imported from Italian Oil control and Germany Rexroth.

2.Main components if HG series concrete placing boom are imported from world famous companies such as Japan Omron and France Schneider.

3.Both wired and wireless remote control is available.

4.The slewing mechanism is normally closed type, that means slewing brake is always closed in general working conditions except that the slewing motor is connected with oil, the whole vehicle can not slew, the placing boom is fixed to avoid collision.

5.Low cost: the delivery bend pipes are accurately bend-cast, thus even the wearing of the pipes and prolong its service life.