TN-ORIENT Rotary Drying Equipment
Type:Rotary Drying Equipment | Place of Origin:Shandong China (Mainland) | Brand Name:TN-ORIENT | Model Number:WSG-2000 |
Certification:CE | After-sales Service Provided:Engineers available to service machinery overseas | Water Evoparating Capacity:3000kg/1h; 2000kg/1h; 1500kg/1h;1000kg/1h;500kg/1h;250kg/1h | Drum Wall Thickness:8-16mm |
Inclination:0.4% | Rotation(rpm):5-20rpm (adjustable according to different raw material) | Damage parts and the life:Bearing:1-2 years; Tricorn belt B model | Changable Fuel:LPG; Gas; Diesel, Wood Pellet; Coal; Wood Wastes |
Biomass Furnace:Direct Biomass Furnace and Indirect Biomass Furnace | Heat-Exchanger:To equip with the Biomass Furnace | Equipment List of Drier:Drum; Screw Conveyor; Cyclone, Pipe, Fan, Air-Lock, Cabinet; Furnace | Installaing&Commission&Trainning:It is no problem to send our engineer to the foreign countries. |
TheTN-ORIENT Rotary Drying Equipment is a type ofindustrial dryeremployed to reduce or minimize the liquidmoisturecontent of the material. The dryer is made up of a large, rotating cylindrical tube, usually supported bysteel beams. The dryer slopes slightly so that the discharge end is lower than the material feed end in order to convey the material through the dryer undergravity. Material to be dried enters the dryer, and as the dryer rotates, the material is lifted up by a series of internal fins lining the inner wall of the dryer. When the material gets high enough to roll back off the fins, it falls back down to the bottom of the dryer, passing through the hot air as it falls. This air can either be moving toward the discharge end from the feed end (known as co-current flow), or toward the feed end from the discharge end (known as counter-current flow). The hot air can be made up of a mixture of air and combustion heat energy from a burner, in which case the dryer is called a direct heated dryer. Alternatively, the hot air may consist of air or another (sometimes inert) heat energy that is preheated. When the air is preheated by some means where burner combustion heat air does not enter the dryer, the dryer known as an indirect-heated type. Often, indirect heated dryers are used when product contamination is a concern. In some cases, a combination of direct-indirect heated rotary dryers is also available to improve the overall efficiency.
WSG-SeriesTN-ORIENT Rotary Drying Equipment can be used to dry the following material:
a. Sawdust, grazing, leaves, sugarcane biogases, and animals’ wastes and so on. And it can be used in Chemical Plant, Mine, Metallurgy and other industries. For example, the ore, the scoria, coal, metallic powder, phosphor fertilizer, sulfur.
b. It can dry the granule materials which have special requesting and must dry in low temperature. For example, Vesicant; Light Calcium Carbonate; Active Dust; Magnet Powder; Plumbago and so on.
During the Drying Process, the best moisture content to pellet and briquette is about 13-15% and 11-12%, the function of the TN-ORIENT Rotary Drying Equipment is to make the crushed pieces with suitable moisture.
TheTN-ORIENT Rotary Drying Equipment is made up of Direct or Indirect Biomass Stove, Main Rotary Drum Body, Screw Conveyor, Cyclones, Air-locks, Fans and matched Pipes which can realize to reduce the moisture from 60%-10%.
WSG-1500 Rotary Drum Dryer with Biomass Furnace HGJ-200 Small Rotary Drum Dryer
Indirect Biomass Furnace of Rotary Drum Dryer
Plenty of Storage of Rotary Drum Dryer
Packaging Detail:Exporting Packing |
Delivery Detail:30-50 Dyas |