Home  >  Food & Beverage Processing Machinery  >  Food Processing Machinery Parts

Micro Magnetic powder clutch, 1.compact structure and light weight, 2.multi-function and versatile, 3.suitable for all machinery - details see: https://www.machineto.com/tj-poc-c-micro-magnetic-powder-clutch-for-tension-control-in-food-processing-machine-10035716

TJ-POC-C MicroMagnetic powder clutch for tension control in food processing machine

this model TJ-POC-C is widely used in food processing machine,such as cookie making machinne,meating cutting machine,noodle makeing machine,especially in mooncake making machine.

Basic features:
1, the excitation current - torque characteristic
Exciting current and torque is linear relationship between the exciting current can be controlled by adjusting the size of torque.
2, Speed - torque characteristics
Independent of torque and speed to keep constant. (Magnetizing current is constant, the allowed range of slip speed change of the torque from the impact of high and low speed) static torque and dynamic moment there is no difference.
3, the load characteristics
Magnetic slip clutch allows power, cooling conditions in a certain time, is constant. Selection of the actual use, the practical power to be allowed to slip slip-power or less. Use of high speed, the need to reduce the torque to use.
4,selection
Magnetic clutch to their location of choice, in the slip under the premise of power matching, magnetic clutch on the high-level, you can choose a smaller size. If not match, it should be placed in institutions low end (the middle or rear). Work to reduce the torque to increase speed no difference.
Usage:
Magnetic clutch DC power supply for excitation. Magnetic clutch during transport, often using the magnetic particle build-up somewhere, and sometimes even a "stuck" phenomenon. As long as the clutch the whole time turning 180 degrees, beating with wooden hammer several times, so that loose powder off. Or turn the lever around the shaft, so long as immediately after turning. Connection with the coupling section of the clearance fit on the proposed use. Non-axial beat. Should be carried out before use running-turn, first through 20% of the rated current operation and then power off after a few seconds, repeated several times. 500N.m more clutch. Another part of the magnetic loading. In the running-in, the magnetic powder from the top of the filler, the situation in the barrier below the excitation current gradually turning into the side.

Long-term without the magnetic clutch, should be stored in a dry place, storage products, more than one year, before the proposed use of a comprehensive maintenance.

parameters: