Home  >  Construction Machinery  >  Building Material Machinery  >  Tile Making Machinery

manual tile cutter, High cutting speed, Perfect cutting effect, high accuracy tile cutter, low noise manual tile cutting machine - details see: https://www.machineto.com/tile-cutting-machine-tile-cutting-tools-cutting-ceramic-tile-cutting-10085933

Manual tile cutter

Character:

Manual ceramic tile cutter mainly applied in cutting various of Internal and external wall tiles, floor tiles, solid tiles, ceramic plates, glass ceramic tiles and glass, etc. Simple mechanical operation, environmental protection, clean, convenient, professional, accurate, high quality and efficient.Of course it becomes immediately object that a lots of customers pursued.

Manual ceramic tile cutter was more efficient and accurate than traditional cutting machine, it can reduce waste of materials, and could improve working Efficiency.

1. Finish your homework. The cutting speed is fast, a few seconds;

2. The cutting effect is good, high precision straight and smooth edge;

3. The cutting cost is low, a round knife can cut 50000 to 70000 meters;

4. No electricity, no water, no noise, no dust;

5. Operation is simple and convenient, safe

Type	600#	800#	1000#	1200#
The biggest Width	600mm	800mm	1000mm	1200mm
The smallest Width	35mm	35mm	35mm	35mm
The biggest thickness	6-15mm	6-15mm	6-15mm	6-15mm

ITEM NUMBER	MAX CUTTER	MASTER CARTON/WEIGHT	PCS IN 20'/40'/40HQ
LF-TC-600A	600MM	83.5*27*42CM(2PCS)/25KGS	588/1218/1428
LF-TC-800A	800MM	104.5*27*42CM(2PCS)/29.3KGS	448/928/1088
LF-TC-100A	1000MM	125.5*27*42CM(2PCS)/33.5KGS	392/812/952
LF-TC-1200A	1200MM	146.5*27*42CM(2PCS)*37.5KGS	360/730/850

Comapny show

Operate show

Manual tile cutter:efficient, accurate,environmental

Product components

Advantages for 600/800/1000/1200

Key parts:special steelness track

Parts explain

Base show

Details show:ensure the accurate of cutting

Operation steps

Operation steps:

The first step:positioning

Move scale and selected cutting size,with one hand holds the operatehandle,sliding seat puled to the back,tiles will be placed on the seat board,and aligning the cutting line of ceremic tile with the platebeam,tile front depend on bottom cut side.

The second step:scribing

Put down that knife handle wheel anda tile surface contact,will handle push forward the cutter wheel on the surface of tiles cut out of continousuniform straight line.

The third step:pressing

The operating handle is put down on thefront end of the ceramic tile,with proper force operating handle downward pressure,ceramic tile be disconnected along the line.

The fourth step:Cutting

cutting,separating effect

Attention:The cutting marks were more thin and light, the tile edge would be more correct and fine. On the contrary, thick and dark cutting marks would be with bevel and ugly edge. So the pulling force should be light, in addition, the tile’s corner would be break if the cutting marks was interrupted.

How to use the Manual ceramic tile cutter safely?

1, Open the free foot, lock the nut.

2, Adjust the cutting size on the rule rod, lock the fixed screw rod by hand after confirmed.

3, Put the tile on the platform.

4, when starting to cut, first pull the pull-push rod to the end, then put the blades on tile lightly, push the blade to front slot along the main shaft, next put the foot on tile, flap the end of pull-push handle lightly, so the tile would break along the cutting marks.

Package and shipment

The best describe is comments from users

The best describe is comments from users

The best describe is comments from users

Safety sale service