THL-6 type 800kg/8h Carbonization furnace,Carbonization stove

Carbonization furnace, 1.smokeless, 2. high carbonizing rate, 3. with CE,ISO - details see: https://www.machineto.com/thl-6-type-800kg-8h-carbonization-furnace-carbonization-stove-10341007

Condition:New	Type:Air Flow	Application:Carbonization biomass rod	Place of Origin:Henan China (Mainland)
Brand Name:Wanqi	Model Number:THL-6	Effective Volume:4 cubic meter	Dimension(LWH):3.522(m)
Weight:4t	Voltage:380v	Power(W):1.5kw	Certification:CE, ISO
Warranty:12 months	After-sales Service Provided:Overseas third-party support available	output:800kg/8hours	material:steel and refractory brick
Raw material:wood logs/branch,bamboo,briquettes	Factory visiting:yes

1. Four characteristics of Wanqi carbonization furnace

1, Environment friendly
2, High capacity and low cost
3, Easy operate and maintain
4, higher safety

2. Traditional type VS New type

1. The carbonization of the old-type furnace takes advantage of spontaneous combustion

of biomass briquettes. But the new-type furnace adopts the dry distillation of charcoal technology and also the output charcoals are with good quality and show

metallic luster.

2. The production ofold-type is sporadic, and thenew type is continuouswhich improves the production efficiency to a great

extent.

3. The old-type makes plenty of heavy smoke, even if with the cooling treatment, it still brings the serious air pollution.Different from the oldtype furnace, the newtype does not exhaust the heavy smoke from the carbonization process to the air,oppositely, it collects. The smoke goes intothe burner through the pipes and burns as fuel gas for recycling use, to reach the aimof replacing the normal fuel and continue the carbonizing process.The design of new-type furnace avoids the air pollution of heavy smoke exhausted.

4. The operation of old type is quite complicated, before carbonization, the briquettes need to be put properly which wastes too much time and labour.However, the briquettes can be put irregularly and then process carbonization directly, saving much time and labour.

5. The production efficiency of the oldtype is low. Every 24 hours, the output of 5m³furnace is only around 1 ton. By contrast, due to the design of continuous production,the new-type furnace can produce around 200 kg charcoals every 1-2 hours, The efficiency of the new type is completely 4 times more than the old-type, which greatly reduce the expenses spent in a great amount of old-type equipments when target capacity is high.

3. Technical parameters ofWanqi carbonization furnace

Model	Tech spec
THL-4	Output: 500kg/8hours Carbonizing time:8hours Carbonizing rate:99% Overall size: 2.822(m) Weight(t):3.5
THL-6	Output: 770kg/8hours Carbonizing time:8hours Carbonizing rate:99% Overall size: 3.522(m) Weight(t):4
THL-8	Output: 1000kg/8hours Carbonizing time:8hours Carbonizing rate:99% Overall size: 422(m) Weight(t):5T