Home  >  Raw Material Processing Machinery  >  Rubber Product Making Machinery

thermosetting BMC ,DMC injection molding machine, 1.PLC control, 2.Single and double moving plate, 3.auto injection, 4. CE - details see: https://www.machineto.com/thermosetting-bmc-dmc-injection-molding-machine-double-station-10339530

thermosetting BMC ,DMC injection molding machine 150T double station

1. Type :

1.HS single sliding plate type , one up mold one down mold

2. HSD Siamese double sliding plate type , one up mold two down molds

3. HR2 three column one disk 1800 turning type , one up mold two down molds

2.Features:

1. vertical locking mold , horizontal injection , put the insert easy and machine height lower

2. increase output and more convenience

3. DMC ,BMC specially charging barrel

4. Special hydraulic feed device installed on the shoot cylinder, with feeding hole directly connected, ensure that cylinder won't deformation because of heat stress
5. sectional type thimble function, can be used for cold water material running way or short material running way mould design, so as to reduce nozzle waste and reduce the cost

6. locking mold column middle part special quenched and tempered, surface strengthening treatment, make it's more wearproof
7. Special sandwich plate design, including prevent hot cold plate + insulating glass fiber board ensure the mold heat transfer caused by the machine stability and using life problem to reduce the unnecessary energy waste

3. main technical parameters

BMC-150HSDSpecification
	INJECTION UNIT			mm	Φ100
		Screw Diameter
				cm3(CC)	2000
		Theoretical Injection Volume
				cm3/sec	183
		Injection Rate
				L	30
		Deposit Plastic Capacity
				r.p.m	0~300
		Screw Speed Rotation
	CLAMPING UNIT			T	150
		Clamping Force
				mm	350
		Clamping Stroke
				mm	400
		Min.Mold Thickness
				mm	750
		Max.Opening
		(L*W)		mm	760*380
		Distance Between Tie Bars
		(L*W)		mm	680*560
		Platens Dimension
				mm	120		120
		Ejector Distance			120		120
				kN(tf)	56.8(5.8)		56.8(5.8)
		Ejector Force
	OTHERS			Mpa(kgf/cm2)	21(214)
		System Pressure
				L	300
		Oil Tank Capacity
				kW	15
		Electric Power
			L*W	mm	4400*2250
		Machine Dimensions	H	mm	3415

4.machine pictures:

5. packing pictures :

6. our exhibition pictures:

7. The main service item on our machine

1. installation and debugging: Our engineers will teach you about the installation and debugging for free.
2. Technology training : Our company will offer technology training for your operation.
3. After-sales service: We will supply the free repairment on this machine for one year,

but will supply the maintenance lifetime. ( the service is only for natural damage)