Home  >  Apparel & Textile Machinery  >  Shoemaking Machines  >  Lamination Machines

1. vertical fabric to foam laminating machine, 2. suitable for EVA sheet, firber,fabric, insole board, pu leather, 3. save glue - details see: https://www.machineto.com/th-120c-vertical-type-fabric-laminating-machine-10266618

Function:This machine is used for the glue lamination of foam, fabrics, EVA as well as the materials for making shoes, hats, gloves, handbags, leather garments, sofa, seat cushions of the car and etc.

This machine is used to glue and laminate the cloth, leather, non-woven fabrics, net/mesh and other materials on sponge, reborn sponge, EVA and PE. It has characteristics of smoothness without crimple, fastness of conglutination, saving on power and quick composite.

Features:

(1) The design of the complete machine emphasizes on the stable performance and secure supervision.

(2) According to the request of the cloth and the glue, a variety of specification chromium rollers are made by measurement, which improved the lamination quality effectively and decreased the glue consumption.

(3) It adopts the net/mesh belt of high temperature resistant on hard chromium roller and the process of pressing cloth proceeds evenly.

(4) Replacing the spring pressing roller with the cylinder which raises the whole speed.

Technical parameter:

Power supply / power	380V/35KW
Motion	3HP+2HP
Heating tube size	Φ1200mm×1830mm
Working width	1700mm
Working speed	30-40 yards/min
Machine Size	7800mm×2600mm×2400mm
Weight	2800KG

Fabric with foam

Foam sheet with insole board

foam with PU leather and insole board

Caution to use our lamination machines:
1. The machine surface should be without watermarks, oil, dust, debris, large drum, mesh belt, rolling wheels, idler pulley, plastic pots, plastic roller, pulp wheel, knife plate should wipe, wash clean.
2. Strictly prohibited on-load open, barrier gate.
3. Motor can never exceed the load (110%); accelerate, deceleration turning "speed adjustment" knob should be careful, and gradually transferred to the required speed, or easily damaged motor.
4. Forbid to operate "positive inversion switch" when machinery is in running, otherwise fragile to damage converter and motor.
5. To adjust the wheel of stepless variable speed machine can fine-tune the tightness of gluing when machine running, keep material speed synchronous with the heating roller, but prohibit to rotate the hand wheel when machine stop, (that is to say can not change speed), Otherwise, easy to damage stepless gearbox.
6. Keep waxing regularly on stepless gearbox, motor belts, often add oil in chains, bearings, cylinder stroke, and change oil regularly in worm gear reducer to ensure its lubrication, running well.
7. Under normal circumstances, "Manual / Auto" switch of electrical panel box should be at "automatic" position, electric eyes, limit switch works, or else mesh belt does not adjust automatically lead to run out the roller (accompanied by alarm sound continuously), in this case, stop as soon as possible, and re-adjust the location of mesh belt.
8. Mesh/net belt adjusted edge automatically only when the main engine in the "Forward" situation.
9. When work stopped, if the temperature table shows heated roller temperature above 80 degrees, it is prohibited strictly to stop running big rollers, or else damage mesh belt due to high temperature, it at your own risk, our company is not listed income within the scope of the warranty. Therefore, must let the mesh belt (big drum) keep running until the temperature below 80 degrees table showed, then stop. Out of work, the rubber roller are not allowed to pressure on the heated wheel, free state must be left vacant place.
10. Handle scraper board carefully, otherwise easy to damage the gluing embossing roller.
11. Big electric box should open regularly to check the time relay and intermediate relay whether loose or not, inside dust, cotton and other dirty (miscellaneous) material to be removed regularly to prevent blockage of cooling channel converter inconvenience of the machine.
12. Inverters data has been set well before leaving the factory, non-professionals is strictly prohibited to change, set, disassembly and repair.

Welcome to contact us for more details! We sincerely welcome your coming to our company!