Home  >  Apparel & Textile Machinery  >  Textile Machinery  >  Textile Dyeing Machines

1.three sizing boxes warping sizing machine, 2.High quality, 3.Long life, 4.Good service, 5.Quick - details see: https://www.machineto.com/textlie-three-box-warping-sizing-machine-10277555

This series are mainly used in association with shuttleless loom for sizing warp of high-density ,and broad cotton fabric, cotton-chemical fiber blend fabrics, linen and linen-chemistry fiber blended fabrics.

This series can be classified into 3 types according to driving mode :dual-unit drive,3-unit drive and 7-unit drive.

with constant development of cloth varieties(especially when the sizid head approached or exceeded 20000,

three- box sizing machine is designed for customers its process flow chart is as below.

• Main technical parameter

Nominal width of headstock :320 , 360

Maximum beam winding diameter(mm) : 500- 805 or 550-1016 or 550-1200

Minimum winding diameter : 110mm

Maximum winding tension : 6000N

Working speed : 80m/min

• Beam creel

1. 16 warp beams arranged in 4 creel shelves ,each shelf can bear 4 beams in two layers and two rows. Passages for operator

are constructed between creels (More beam creels can be supplied according to user's demand).

2. Beam tension manual adjusting unit or electric-gas automatic control unit .

• Sizing box

1. Double dip double nip,Maximum squeezing pressure 30KN
2. Capacity:Main box 100liter ; auxiliary sizing box 80liter
3. Squeezing rollers are specially designed for getting uniform squeezing pressure. Squeezing pressure can automatically
4. change with main speed to ensure uniformly sizing.
5. Automatically heating control for sizing box.

• Drying unit

1. 12 flat head-sealed stainless steel cylinders of 800mm (More cylinders can be provided at opinion)

Cylinders are arranged into three sets. Among them four drying cylinders coated with Teflon are

semi-positively driven by chain and toothless chain wheel. Chain is tensional pneumatically.

2. Automatic temperature control for preheating and combined heating cylinders

3. Hot air and moisture are exhausted from drying chamber by a fan.

4. Lifting, engagement of empty beam, pressing the winding beam, disengagement and doffing of full beam are all

controlled pneumatically. Pressure roller and measuring roller are all pressure and relieved pneumatically.

Beam is supported by right- and left- moving housings and driven by motor.