textile yarn tensioners

OPGW tension set, simple structure tension set, convenient installation tension set, ios9001 CE, fiber optic cable tension set - details see: https://www.machineto.com/textile-yarn-tensioners-10271452

Place of Origin:Guangxi China (Mainland)	Brand Name:GLshihui	Model Number:SHND-O	color:silver
use1:opgw	use2:adss	use3:fiber optic cable	use4:power
use5:link	with:ground wire	rods:200--2500mm	rods1:excellent galvanize
RTS:95%	Application:OPGW	Type:clamp	Gender:no

contact supplier for textile yarn tensioners

Specifications

Tension set Dead-end for ADSS cable
1.Least wear;
2.Easy installation;
3.Special design;
4.Reduce vibration.

Function

ADSS preformed rods tension clamp is used for ADSS cable route’s fixing and anchor shackling. Usually installed on the terminal tower, tight tension tower and intersection angle tower ect.

Feature

Theholding strength of preformed rods tension clamp to optical cable can reach over 95% of cable’s limit RTS without the effects of stress concentration and vibration stress.

Composition

Each preformed rod tension clamp sleeve consists of inner rod, outer rods and suspension link ect.

Customers can choose other link fittings such as clevis, connecting rod ect. if necessary.

Customers can also choose materials of tension clamp such as aluminum-clad steel rod and galvanization steel rod.

Partial model parameters:( tension set )

model	**Length of rods		Holding strength (KN)	Failing load (KN)	Span (m)			Color code	Estimate weight (kg)
model	Inner (mm)	Outer (mm)	Holding strength (KN)	Failing load (KN)	Wind speed 42m/s	Wind speed 35m/s	Wind speed 25m/s	Color code	Estimate weight (kg)
*SHN-AXXXX/025	1500	1100	25	≥70	200	250	300	black	2.5
SHN-AXXXX/035	1700	1150	35		250	300	450	black	3.0
SHN-AXXXX/045	1900	1250	45		400	500	600	black	3.5
SHN-AXXXX/060	2100	1350	60	≥100	450	600	750	black	4.0
SHN-AXXXX/070	2300	1400	70	≥100	650	750	850	black	4.5
SHN-AXXXX/080	2500	1500	80	≥150	750	850	950	black	5.0
SHN-AXXXX/100	2800	1600	100	≥150	800	950	1100	black	5.5

Notes:In the model column, SH represents these are Shihui company’s

Products, A represents these products are for ADSS optical cable. XXXX means cable’s diameter (unit: mm)×10², Use “0” ahead when it is less than 4 figures, e.g.: Cable’s diameter is 12.85mm then we need to write 1285. Three figures after “/” mean the holding strength of tension armour (unit: KN), and use “0” ahead when it is less than 3 figures.

Preformed rod tension clamp can be made up of aluminum-clad steel and galvanization steel according to the function and the customer’s needs.

In order to make sure the well cooperation of tension clamp and optical cable, besides the named model, you should give cable’s diameter, RTS, cable’s elastic modulus magnitude and clamp materials required when you give the order.

tension set