Home  >  Apparel & Textile Machinery  >  Textile Machinery  >  Textile Finishing Machines

Heat setting machine is used for heat setting process of chemical fibre or mixed fabrics. also used for ammine fabrics. - details see: https://www.machineto.com/textile-heat-setting-machine-10278317

Usage of the machine:

This machine adopts hot air setting,maximum working temperature is 220°C.it is used for heat setting of tubular polyester,blender cotton fabrics. And it can be used for pre-setting of spandex. After worked by this machine,customer can get steady size,flat surface.

Techincial parameters

Standard working width double tube 1400mm

Maximum hot air temperature 220°C

Machincal speed 3-20m/min(speed adjusted by inverter)

Machine overfeeding rate -20%—+50%

Heating source Electric(135KW),

Thermal oil(1GJ/H)

Drive mode three sections inverter control and double driven

Exit mode plaiting or rolling

Motor power 19.94kW

Air pressure 0.4—0.6MPa

Machine demision(L×W×H) 6150×4900×3300

Machine weight about 5T

Stardard equips

Infeed part

1. The infeed part include infeed chamber,overfeeding device and width adjust device.

2. Overfeeding wheel is made of polyurethane material,it is durable and have long lifespan.overfeeding driven is controlled by inverter,overfeeding rate is steady.

3. Manual width adjust,safety and convinent.

Hot air setting part

1. Equips one set 11kw motor and aluminum alloy impeller,the triangle belt is driven between the motor and impeller shaft,it is realiable.the impeller is light,run steady,low noize and big air volume.

2. Thermal oil heated type equips two sets high efficient heat exchanger,the heat exchange tube is steel aluminum compond fin tube,electric heated type equips 45pcs(each pc 3kw)electric tubes. The electric tube is controlled by group.

3. The pull filtering net is in front of the blower,the filtering net is 40meshstainess steel net,filter the fibers to avoid the pilus block the exchanger and nozzles.

4. The machine body is welded of super carbon angle steel and channel steel.

5. The four sides walls of the chamber are insulated pannels with thickness 80mm,the Ptype rubber seal is dureable and can decrease the heat loss.

6.The heat chamber has the dust exhaust system,the blower is centrifugual motor,dust exhasust volume is controlled by air door.

Exit part

1.This part consists of rubber roller,plaiter device and coolant device.

2.The rubber roller adopts pneumatic pressure on system,and the pressure system equips air cylinder,reversing valve and so on..

3.Squeezing roller adopts super rubber,heat resistant,durable and longlife span.

4. Coolant device equips two sets axial flow blower,big air volume,air is evenly.

Control valve(thermal oil type)

The thermal oil control valve is proportion type,Corrugated pipe seal electric three way valve.

Electric heater(electric heat type)

The electric heater consist of electric tube,group control.

Pictures of the machines: