Tensionless Dryer for fabric relaxing dryer

1. Tensionless Dryer, 2. Textile Finishing Machine, 3. Pre-shrinkage Dryer, 4. Fabric Relaxing Drying machine - details see: https://www.machineto.com/tensionless-dryer-for-fabric-relaxing-dryer-10278711

Condition:New	Automatic Grade:Automatic	Place of Origin:Jiangsu China (Mainland)	Brand Name:sunwin
Model Number:TTH-3200-8	Voltage:380V	Power(W):136000	Dimension(LWH):265.23.15(m)
Weight:29tons	Warranty:1 year	After-sales Service Provided:Engineers available to service machinery overseas	Function:Fabric Relaxing Dryer
Type:Single pass Dryer for tubular or open width fabric	Running Type:Single Pass dryer	Working width:1800-3200mm	Drying Chamber:4-12
Transmit:Conveyor Belt	Heating System:Thermal oil, gas or steam	Speed:Inverter Control	Control:control cabinet with PLC
Temperature Contol:for each chamber

TTH achieves a high production capacity with a low utility consumption.It features a professional designed blower, air ducts and nozzles.This perfect combination enables the fabric to form in wave pattern and continues tumbling between the up and down conveyor in a fully relax condition throughout the whole drying process.Fabric after the TTH drying process gives a perfect hand feel and achieves a good shrinkage effect.

Special Feature:

1) Fabric entry height only 1.3M, very easy operation

2) Up and down conveyor belt design facilitate the fabric tumbling in wave form,

more relaxing and tension free.

3) Extremely low chamber with 16sets nozzles(normal dryer only 14sets nozzle),

greatly increase the efficient drying area.

4) All service doors and heat resistant panels are 15cm thickness

5) Drawer design filter, easy for cleaning

6) Throttle type air flow adjustable device, individual air flow adjustment for up and down

nozzle in each chamber.

7) Touch screen color monitor controller

8) Sub-control box at the back side of machine for easy operation.

9) High production

Optional:

Pin-frame section Entry for TTH.

There is too much longitudinal tension during the wet processing such as scouring, bleaching, dyeing , squeezing, slitting, etc.It can greatly affect the shrinkage of the finished product,.Besides the tension, a lot of chance to cause winkle,crease mark, folding mark during dyeing, hydro extraction, loading and unloading procedure.All the mentioned problems may not be completely solved even after stentering and campaction. The pin-frame section can perform an important purpose to adjust the weft to right direction, stretch the width for compensate the tension during the wet processing,remove most of the wrinkle and marking problem, and apply sufficient overfeeding before the drying process.Improve the shrinkage result for final product.